“兩寬一高”地震采集技術工業化應用的進展
[Abstract]:Wide azimuth, wide band, high density (referred to as "two wide and one high") seismic acquisition technology in solving the problem of low signal-to-noise ratio area exploration, complex geological body imaging, Lithologic exploration and fine oil-gas reservoir description and monitoring have obvious technical advantages, but in order to popularize this technique, we must overcome the two restrictive factors of seismic source and acquisition. In order to reduce the wide azimuth on land, two restricting factors affecting the industrial application of "two wide, one high" seismic exploration technology, namely, the excitation of wide frequency signal source and the high efficiency acquisition technology of vibroseis, are discussed in order to greatly reduce the wide azimuth on land. The operation cost of high density seismic acquisition makes it economic and feasible. Based on the analysis of the characteristics of vibroseis wide frequency excitation technology and the targeted design of scanning signal, the user customizes the synchronous excitation method for the intelligent construction scheme of vibroseis high efficiency acquisition technology. The high efficient operation management of the team and the quality control and management of massive seismic data are refined and optimized. Combined with the practical application effect of seismic acquisition and processing, the good prospect of industrialization application of this technology is shown. The conclusions are as follows: (1) based on the new generation of low frequency vibroseis, the solution of broadband seismic excitation technology is presented. Based on the field seismic management system and the mass seismic data quality control and management system as the core, the vibroseis high efficiency acquisition technology solution has effectively solved the technical bottleneck mentioned above. The "two widths, one high" seismic exploration technology has already had the acceptable performance-price ratio; (2) this technique can greatly improve the imaging effect of seismic data and improve the prediction accuracy of oil and gas exploration under the condition of acceptable cost. It is worth popularizing and applying.
【作者單位】: 中國石油集團東方地球物理勘探有限責任公司;
【基金】:“十三五”國家科技重大專項“陸上寬頻高密度地震勘探配套技術”(編號:2017ZX05018003) 中國石油天然氣集團公司科研專項“物探重大技術現場試驗與集成配套”(編號:2017D-35)
【分類號】:P631.4
【相似文獻】
相關期刊論文 前10條
1 張穎;黃昌武;;“高密度地震采集技術交流會”在北京召開[J];石油勘探與開發;2006年05期
2 Andy Peters ,黃子齊;陸上地震采集技術新突破[J];石油物探譯叢;2001年01期
3 盧湘鵬;;基于復雜地質目標的地震采集技術綜述[J];內蒙古石油化工;2012年11期
4 曹國濱,張旭,張交東;勝利探區水網區地震采集技術[J];物探與化探;2003年04期
5 劉成齋;;勝利探區地震采集技術發展歷程回顧與啟示[J];石油與天然氣地質;2008年03期
6 劉成齋,邸志欣,呂公和,王彩紅,張春,張升平;四扣地區高精度目標地震采集技術研究[J];物探化探計算技術;2002年02期
7 孫黃利;田軍;韓軍鋒;;難動用儲量地震采集技術及應用效果[J];陜西煤炭;2008年06期
8 夏勇;陳智;朱國銘;于世東;李世曉;李康虎;張新峰;;伊朗地震采集項目中的地震采集技術[J];石油地球物理勘探;2008年S2期
9 羅衛東;張曉斌;王勤耕;周鳴;李大軍;;巨厚黃土地區地震采集技術研究及應用[J];鉆采工藝;2010年S1期
10 姚盛;;陸上地震采集技術新進展[J];工程地球物理學報;2011年03期
相關會議論文 前10條
1 葉勇;;地震采集技術的新進展[A];中國地球物理2010——中國地球物理學會第二十六屆年會、中國地震學會第十三次學術大會論文集[C];2010年
2 張曉斌;羅衛東;唐怡;張明柱;雷迎春;;寬線大組合地震采集技術在厚黃土區的應用[A];中國地球物理學會第二十四屆年會論文集[C];2008年
3 何永清;寧宏曉;李培明;尹吳海;;柴達木盆地地震采集技術探索[A];中國地球物理2013——大會報告[C];2013年
4 張樹林;;海上多波多分量地震采集技術——以鶯歌海盆地為例[A];中國地球物理學會第二十屆年會論文集[C];2004年
5 楊貴祥;高銳;仲伯軍;侯樹麒;賀振華;楊振升;;單點單分量高密度地震采集技術[A];中國地球物理·2009[C];2009年
6 陳樹凱;郭平;徐榮才;;低信噪比地區地震采集技術[A];中國地球物理學會第22屆年會論文集[C];2006年
7 蘇衛民;秦鑫;羅明;;準噶爾盆地南緣霍爾果斯地區地震采集技術及效果分析[A];中國地球物理學會第二十屆年會論文集[C];2004年
8 王咸彬;;塔里木盆地寒武系深層地震采集技術[A];中國地球物理·2009[C];2009年
9 許保安;王建勇;佟志偉;魏德舉;張珊;;三塘湖盆地蘇海圖地區地震采集技術研究[A];中國地球物理學會第二十七屆年會論文集[C];2011年
10 鄧志文;張宇生;李培明;鄒雪峰;;松遼盆地南部高分辨率地震采集技術與效果[A];中國地球物理.2003——中國地球物理學會第十九屆年會論文集[C];2003年
相關重要報紙文章 前10條
1 李金水 張宣堂;復雜地表地震采集技術研究獲新成果[N];中國石化報;2010年
2 通訊員 譚曄;突破東部探區勘探“瓶頸”[N];中國石油報;2006年
3 孟可;可控震源長壽的奧秘[N];中國石油報;2004年
4 東方物探技術專家 震源服務中心副總工程師 劉金中;低頻可控震源應用前景廣闊[N];中國石油報;2014年
5 集團公司工程技術公司 張衛軍;轉變發展方式 推進可控震源應用[N];中國石油報;2010年
6 李金生;沙特可控震源地震勘探技術[N];中國石油報;2005年
7 記者 馬永 通訊員 陶樅;東方物探掌控低頻可控震源技術[N];中國石油報;2014年
8 王剛毅 黃志海;南方山地勘探首次運用可控震源[N];中國石化報;2006年
9 記者 馬永邋通訊員 王霞;東方物探履帶輪系可控震源研制成功[N];中國石油報;2007年
10 本報記者 黃普根 通訊員 張永久;新技術新工法揚威北疆[N];中國石油報;2014年
相關博士學位論文 前7條
1 孫鋒;海洋電磁式可控震源關鍵技術研究[D];吉林大學;2009年
2 倪宇東;可控震源地震勘探新方法研究與應用[D];中國地質大學;2012年
3 高健;可控震源編碼激發技術研究[D];吉林大學;2013年
4 楊志超;電磁式可控震源地震信號檢測關鍵技術研究[D];吉林大學;2015年
5 張林行;基于接力式以太網的可控震源地震勘探數據傳輸技術研究[D];吉林大學;2007年
6 劉玉海;不同震源地震數據資料閉合問題的研究[D];西南石油大學;2013年
7 王俊秋;可控震源金屬礦地震勘探關鍵技術與試驗[D];吉林大學;2013年
相關碩士學位論文 前10條
1 姜德志;高分辨率地震采集技術在遼河探區的研究與應用[D];中國地質大學(北京);2009年
2 蘇戰;高密度地震采集技術在鄂爾多斯盆地的應用研究[D];西安石油大學;2011年
3 葉曉東;四扣地區高精度目標地震采集技術研究[D];中國海洋大學;2004年
4 焦桂行;全數字地震采集技術在蘇里格地區的應用[D];西安石油大學;2011年
5 周游;基于GMM地質預報用精密可控震源基礎研究[D];山東大學;2015年
6 王丹;整形濾波法可控震源地震數據諧波干擾壓制[D];中國地質大學(北京);2015年
7 張正帥;基于時變窄帶濾波技術提取可控震源掃頻信號方法研究[D];中國地震局地震預測研究所;2015年
8 賈超;電磁式可控震源掃描信號自適應控制技術研究[D];吉林大學;2016年
9 馬瑞琪;電磁式可控震源鎖相控制與廣義預測控制方法[D];吉林大學;2016年
10 郭勇;可控震源高效采集噪音特點及其壓制方法研究[D];西南石油大學;2016年
,本文編號:2392202
本文鏈接:http://www.sikaile.net/kejilunwen/kuangye/2392202.html