本文選題：重晶石　切入點：油酸鈉　出處：《中國粉體技術》2017年02期 　論文類型：期刊論文

【摘要】：通過控制單因素實驗條件,油酸鈉作為改性劑,對重晶石進行疏水調控,探究其改性后的效果與改性劑用量、改性溫度、改性時間以及BaSO_4質量分?jǐn)?shù)之間的關系。結果表明:重晶石改性的優化條件是:油酸鈉的質量分?jǐn)?shù)為1.0%、改性時間為15 min、改性溫度為80℃,BaSO_4的質量分?jǐn)?shù)為30%;獲得改性后的重晶石潤濕接觸角度為128°,使重晶石表面從親水性轉化為疏水性。
[Abstract]:By controlling the single factor experimental conditions, sodium oleate was used as modifier to regulate the hydrophobicity of barite, and the effect of modification, the dosage of modifier and the modification temperature were investigated. The relationship between modification time and BaSO_4 mass fraction. The results show that the optimized conditions for barite modification are: sodium oleate 1.0, modification time 15 min, modification temperature 80 鈩，

本文編號：1616412