【摘要】：本文通過對常用平行分度凸輪綜合,應用齊次坐標變換方法,以VC++6.0和UG為開發工具,對平行分度凸輪綜合與仿真系統進行了較為深入細致地研究,實現了平行分度凸輪CAD/CAM一體化,提高了設計效率,縮短了開發周期,具有重要的現實意義,主要研究內容與研究成果如下： 1.對平行分度凸輪機構參數的設計以及從動轉盤運動規律的選擇進行了較為詳盡地探討研究,歸納了平行分度凸輪各參數之間的關系以及從動轉盤運動規律的計算公式與特性值,總結了從動轉盤運動規律的選取原則以及適用場合,并給出了設計平行分度凸輪輪廓曲線的制約條件。 2.綜合了常用平行分度凸輪,并對平行分度凸輪進行了分類、系列化,對每一系列的平行分度凸輪進行了分析與研究,應用齊次坐標變換方法,推導出了每一系列平行分度凸輪的理論輪廓曲線方程與工作輪廓曲線方程,編制了通用子程序,使用了對話框技術,建立了設計向?qū)?開發了平行分度凸輪仿真系統,該系統操作簡便,具有較強的人機交互能力以及較好的集成性、通用性與實用性。 3.研究了平行分度凸輪仿真系統的輪廓設計模塊、圖形仿真模塊、數據提取模塊、加工仿真模塊以及它們之間的相互關系,可以較好地實現數據共享,其中通過圖形仿真模塊可以判斷平行分度凸輪的正確性以及合理性,避免了不合理平行分度凸輪的生成,提高了設計效率,縮短了開發周期。 4.研究了VC++6.0與UG軟件之間的信息交換技術,實現了在不同數據接口文件之間轉換,以特定文件要求的格式保存數據,然后轉入UG環境,建立了平行分度凸輪三維實體模型,進行了加工仿真,自動生成NC代碼,從而驗證了設計結果的精確性與可行性。
[Abstract]:In this paper, the synthesis and simulation system of parallel indexing cam is studied deeply and meticulously by using homogeneous coordinate transformation method and VC 6.0and UG as developing tools, through the synthesis of the common parallel indexing cam, and by using the method of homogeneous coordinate transformation, the parallel indexing cam synthesis and simulation system is studied in detail. The CAD/CAM integration of parallel indexing cam is realized, which improves the design efficiency and shortens the development period. The main research contents and research results are as follows: 1. In this paper, the design of the mechanism parameters of parallel indexing cam and the selection of the motion law of the driven disk are discussed in detail. The relationship among the parameters of the parallel indexing cam and the calculation formula and the characteristic value of the motion law of the driven disk are summarized, and the relationship between the parameters of the parallel indexing cam is discussed in detail. This paper summarizes the selection principle and applicable situation of the motion law of the driven turntable and gives the restriction conditions for designing the contour curve of the parallel indexing cam. 2. In this paper, the common parallel indexing cam is synthesized, the parallel indexing cam is classified and serialized, and every series of parallel indexing cam is analyzed and studied, and the method of homogeneous coordinate transformation is used. The theoretical contour curve equation and the working profile curve equation of each series of parallel indexing cam are derived, the general subprogram is compiled, the design guide is established by using dialog box technology, and the simulation system of parallel indexing cam is developed. The system has the advantages of simple operation, strong human-computer interaction, good integration, versatility and practicability. 3. The contour design module, graphic simulation module, data extraction module, machining simulation module and their relations in the parallel indexing cam simulation system are studied, and the data sharing can be realized well. Through the graphic simulation module, the correctness and rationality of parallel indexing cam can be judged, the generation of unreasonable parallel indexing cam can be avoided, the design efficiency can be improved and the development period can be shortened. 4. This paper studies the information exchange technology between VC 6.0and UG software, realizes the conversion between different data interface files, saves the data in the format required by specific files, then transfers to the UG environment, and establishes the three-dimensional solid model of parallel indexing cam. The machining simulation is carried out and the NC code is generated automatically, which verifies the accuracy and feasibility of the design results.
【學位授予單位】：山東理工大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH112.2

【參考文獻】

相關期刊論文 前10條

1 薛小雯,邵建敏;利用極坐標方程設計凸輪輪廓[J];華北工學院學報;2001年06期

2 付瑩瑩;;平行分度凸輪輪廓解析設計新方法及其應用[J];機床與液壓;2009年05期

3 張淳,付鐵,劉昌祺;平面凸輪機構CAD系統的研究與開發[J];機械設計與制造;2000年05期

4 吳義生,馮向勇,王寧生;基于UG-II/Manufacturing模塊的凸輪輪廓的交互式編程與加工仿真研究[J];機械設計與制造;2003年04期

5 郝彩紅;尹明富;;平行分度凸輪機構設計專家系統的開發及三維運動仿真[J];機械設計與制造;2007年01期

6 梁金生;;多運動段平面凸輪機構CAD軟件的開發[J];機械設計與制造;2008年08期

7 王晶,李增玲,楊文波,陳衛民;平行分度凸輪機構CAD系統的研發[J];機械傳動;2005年04期

8 張玉華;包家漢;;平行分度凸輪機構的類型綜合[J];機械傳動;2007年01期

9 張玉華;任廣法;;內置式平行分度凸輪機構[J];機械傳動;2007年04期

10 王丞;孫益峰;張駿;;凸輪從動件運動規律完整通用表達式設計及軟件運用[J];機械傳動;2008年06期

相關碩士學位論文 前5條

1 秦鵬;平面盤型凸輪機構智能設計和仿真系統的研究及開發[D];山東理工大學;2006年

2 趙萍;平行分度凸輪機構CAD/CAM系統的研究[D];濟南大學;2006年

3 高文攀;平行分度凸輪的參數化加工及實驗研究[D];燕山大學;2007年

4 王旺;共軛凸輪分割器設計制造及測試系統研究與開發[D];山東理工大學;2008年

5 劉偉;間歇分度凸輪機構的研究[D];江南大學;2009年

，

本文編號：2430217