【摘要】：隨著鋼帶傳動理論研究的進步,加上國內外環境保護要求的呼聲日益提高等,國外最早在歐美化工、醫藥等行業內,出現了原理相同結構用途各異的鋼帶傳動系統。 而伴隨著全球經濟一體化的持續發展,市場競爭日益激烈,化工制造業已經進入了規模競爭時代,面臨嚴峻的競爭成本挑戰。很多企業都選擇了應用自動化生產設備生產,來提升自身產品的競爭力。但是在設備實際的設計、生產、應用、推廣過程中,由于過度依賴參照設計,缺乏基礎數據,導致了分析計算不足;加上三化工作準備不足,可靠性難以有效保證。因此構建一個完整的設計框架對新形勢下的設備生產企業具有重要意義。 本文通過對鋼帶傳動設計理論研究,以整體改進優化的思路,借助于SolidWorks工具,使用有限元法,進而利用COSMOSWorks分析軟件改進現有設計方案。從而提出一整套的設計方案。 本文重點對驅動輪轂、破碎機梳板齒的強度/剛度/模態分析,在此分析的基礎上檢驗設計方案是否可行。對梳板齒、鋼帶進行疲勞計算分析,在此基礎上提出了一些提高使用壽命的辦法。
[Abstract]:With the development of steel belt transmission theory and the increasing demand of environmental protection at home and abroad, the steel belt transmission system with the same structure and different uses has emerged in Europe and America as early as in the chemical industry, medicine and other industries. With the continuous development of global economic integration and the increasingly fierce market competition, chemical manufacturing industry has entered the era of scale competition, facing a severe challenge of competitive costs. Many enterprises have chosen to use automatic production equipment production to enhance the competitiveness of their products. However, in the process of actual design, production, application and popularization of equipment, due to excessive reliance on reference design, the lack of basic data leads to insufficient analysis and calculation. Therefore, the construction of a complete design framework for the new situation of equipment production enterprises has an important significance. In this paper, through the study of the design theory of steel belt transmission, with the idea of overall improvement and optimization, with the help of SolidWorks tools, the finite element method is used, and then the existing design scheme is improved by using the COSMOSWorks analysis software. Thus, a whole set of design scheme is put forward. In this paper, the strength / stiffness / modal analysis of the driving wheel hub and the comb teeth of the crusher is emphasized, and the feasibility of the design scheme is verified on the basis of the analysis. On the basis of fatigue calculation and analysis of comb teeth and steel strip, some methods to improve service life are put forward.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH132.32

【參考文獻】

相關期刊論文 前10條

1 劉敬;朱長才;孫家廣;;基于SolidWorks的設備庫的研究和實現[J];計算機應用研究;2006年01期

2 杜巖,唐謙,李冰;鋼帶傳動系統的設計[J];機械設計與制造;2002年01期

3 楊祖孝;設計鋼帶精密傳動系統[J];機械制造;2001年04期

4 陳艷;帶式輸送機的摩擦理論分析[J];煤礦機械;2001年06期

5 李福固;帶式輸送機托輥間距的合理確定[J];煤礦機械;2002年02期

6 李德生;;鋼帶冷卻機張緊裝置設計及受力分析[J];煤礦機械;2010年04期

7 楊秀英;劉廣偉;;冷凝造粒機鋼帶的焊接維修方法[J];民營科技;2009年01期

8 荀兵;帶式輸送機重型傳動滾筒的有限元分析[J];起重運輸機械;2003年02期

9 廖永芳;;淺談如何解決鋼帶機的鋼帶跑偏問題[J];煉油設備設計;1984年03期

10 岳永軍,巢文革;不銹鋼帶冷卻裝置簡介[J];中國建筑防水;2002年04期

相關重要報紙文章 前1條

1 本報記者 王冬梅;[N];工人日報;2007年

，

本文編號：2259988