【摘要】：可靠的軸向力平衡裝置是高壓多級離心泵實現長期安全運行的重要機構。針對高壓離心泵對運行可靠性和使用壽命的要求,創新設計了一種壓力室平衡裝置自動平衡高壓離心泵的軸向力。在流力基本理論指導下基于試驗流體力學方法研究了3個阻尼孔直徑對整機效率、流量、壓力、功率的影響。針對D25-30×5多級離心泵,通過試驗確定了在阻尼孔直徑為ф4~6mm時,得到了較高的整機效率η=0.701~0.802,效率比原平衡盤結構最大提高18%。機組運行振動小、噪聲低,能長時間平穩可靠工作。
[Abstract]:Reliable axial force balancing device is an important mechanism for long-term safe operation of high-pressure multistage centrifugal pump. According to the requirements of high pressure centrifugal pump for operation reliability and service life, a pressure chamber balancing device is designed to automatically balance the axial force of high pressure centrifugal pump. Based on the experimental hydrodynamics method, the effects of three damping hole diameters on the efficiency, flow rate, pressure and power of the machine are studied under the guidance of the basic fluid force theory. For D25-30 脳 5 multistage centrifugal pump, when the diameter of damping hole is 4~6mm, a higher efficiency 畏 _ (0.701) ~ (0.802) is obtained, and the maximum efficiency is 18% higher than that of the original balance disk structure. The operating vibration of the unit is small, the noise is low, and the unit can work steadily and reliably for a long time.
【作者單位】： 昆明冶金高等專科學校;拉法基瑞安劍川水泥有限公司;
【基金】：云南省應用基礎研究面上項目(2009ZC135M)
【分類號】：TH311

【相似文獻】

相關會議論文 前1條

1 李佩林;華培忠;許昭永;;2SY-83型真三軸壓力室的研制[A];第一屆高溫高壓巖石力學學術討論會論文集[C];1986年

，

本文編號：2244688