本文選題：WinCC + 數據庫�。� 參考：《東北大學》2012年碩士論文

【摘要】：本課題源于一個實際科研項目。該項目主要是研制液壓元件/傳動部件綜合性能試驗系統。試驗內容包括典型液壓閥、液壓泵、液壓馬達、液壓缸和專用傳動部件的動、靜態性能試驗。該試驗系統結合了液壓傳動、自動控制、信號檢測、數據庫設計、工控機和PLC系統等多項技術。本課題負責人機交互設計與數據庫設計。 對于試驗系統來說,人機界面設計和數據庫設計是整個項目中的重要一環,其意義關系到整個項目的質量,一定要做好這項工作。 本論文首先介紹了目前常用人機交互與數據庫軟件設計平臺的方法,并選擇適合本試驗的方法；其次,人機交互設計與數據庫設計都是以試驗規程為出發點。在這里以液壓缸試驗規程為例詳細說明人機交互界面和數據庫的設計依據。依據試驗規程,用WinCC完成了人機界面設計。其中包括登錄界面、主界面(用于選擇試驗)、各試驗單元界面。人機交互實現的功能有用戶管理功能、試驗系統動態顯示、試驗數據的處理、試驗數據的存儲。WinCC與PLC之間的通訊是人機交互的基礎,通訊方式是設置相應的過程變量。 在數據庫設計中,本文以Access為軟件平臺,根據試驗需要建立相應的Access表。在數據庫設計中,本文利用VB6.0訪問數據庫的方法,采用VB中的控件實現WinCC中報表打印、歷史數據查詢和系統管理功能。 完成人機交互與數據庫設計后,在試驗室內對系統進行了調試,初步驗證了上述設計的可行性。
[Abstract]:This subject originates from a practical scientific research project. The project is mainly to develop hydraulic components / transmission components comprehensive performance test system. Test contents include dynamic and static performance tests of typical hydraulic valves, hydraulic pumps, hydraulic motors, hydraulic cylinders and special transmission components. The test system combines hydraulic transmission, automatic control, signal detection, database design, industrial control computer and PLC system. This subject is responsible for the design of human-computer interaction and database. For the test system, the design of man-machine interface and database is an important part of the whole project, and its significance is related to the quality of the whole project. Firstly, this paper introduces the methods of human-computer interaction and database software design platform, and selects the method suitable for the experiment. Secondly, the human-computer interaction design and database design are based on the test rules. The design basis of man-machine interface and database is explained in detail by taking hydraulic cylinder test procedure as an example. According to the test rules, the man-machine interface is designed with WinCC. These include login interface, main interface (for selecting test), each test unit interface. The functions of man-machine interaction are user management, dynamic display of test system, processing of test data, communication between WinCC and PLC is the basis of man-machine interaction, and the communication mode is to set corresponding process variables. In the database design, this paper takes Access as the software platform and establishes the corresponding Access table according to the need of experiment. In the design of database, this paper uses VB6.0 to access the database, and adopts the control of VB to realize the functions of report printing, historical data query and system management in WinCC. After completing the design of human-computer interaction and database, the system was debugged in the laboratory, and the feasibility of the above design was preliminarily verified.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH137.5

【參考文獻】

相關期刊論文 前10條

1 毛聯杰;;S7-300系列PLC與組態軟件WinCC實現通信的方法[J];電氣時代;2006年09期

2 李德英;;基于Wincc的液壓實驗臺監控系統的設計[J];國內外機電一體化技術;2011年02期

3 張曉杰;劉海昌;;基于WinCC的數據采集和監控系統設計[J];工業儀表與自動化裝置;2007年04期

4 鄒彤;WinCC組態軟件的編程技巧[J];化工自動化及儀表;2001年02期

5 黃湖崗;;Acess數據庫在學校信息交流平臺設計與實現中的應用[J];景德鎮高專學報;2011年02期

6 張巨儉,甘仞初;MIS系統中報表系統設計方法探討[J];計算機工程與應用;2003年04期

7 楊路明,雷亞軍;組態軟件WinCC在自動監控系統中的應用[J];計算技術與自動化;2003年04期

8 呂麗平;白鑫;張娟;;WinCC VBS腳本在PU夾芯板連續生產線的應用與研究[J];制造業自動化;2012年02期

9 王養峰;牛立穎;崔廉玉;;PLC與WinCC技術在常化爐溫度控制系統上的應用[J];寬厚板;2009年06期

10 張海云;陳彥;蔡瑞平;王辛朝;曹建東;;Wincc在打包機人機界面中的設計與應用[J];可編程控制器與工廠自動化;2012年03期

，

本文編號：2059466