本文選題：變槳距 + DSHplus�。� 參考：《東北大學》2012年碩士論文

【摘要】：變槳距功率調節技術是大型并網風電機組的重要技術之一。在風力發電機組的運行過程中,只有保證對槳葉捕捉風能的穩定控制,才能輸出質量可靠、安全高效的電能。液壓變槳系統是目前廣泛采用的變槳距控制方式之一,研究其動態特性和控制性能,對提高變速恒頻風電機組的控制質量具有重要意義。 由于風電機組的變槳距液壓系統屬于涉及多種能量的復雜系統,而鍵合圖法建模在處理多種能量間的轉換具有獨特的優勢,故本文在風電機組變槳距液壓系統進行原理分析后,利用功率鍵合圖法建立了系統的數學模型,并在MATLAB/Simulink的仿真環境下搭建了仿真模型,對系統的動態特性進行了分析。根據風電機組的實際工況特點,加入了模糊PID控制策略。結合系統的仿真模型,在仿真環境下檢驗了控制效果。 考慮到液壓系統的復雜性,運用了液壓仿真工具DSHplus搭建了系統的模型。并采用與Simulink聯合仿真的方式,結合MATLAB語言編寫的模糊PID控制器程序,再次對液壓系統的控制效果進行檢驗。
[Abstract]:Variable pitch power regulation is one of the most important technologies for large scale grid-connected wind turbines. In the process of wind turbine operation, only by ensuring the stable control of wind energy capture on the blade, can the power output be reliable, safe and efficient. Hydraulic variable propeller system is one of the widely used pitch control methods at present. The dynamic characteristics and control performance of the variable pitch control system are studied. It is of great significance to improve the control quality of wind turbine with variable speed and constant frequency. Because the variable pitch hydraulic system of wind turbine belongs to a complex system involving many kinds of energy, the bond graph method has a unique advantage in dealing with the conversion between many kinds of energy. Therefore, after analyzing the principle of variable pitch hydraulic system of wind turbine, the mathematical model of the system is established by using the power bond graph method, and the simulation model is built in MATLAB / Simulink environment, and the dynamic characteristics of the system are analyzed. According to the actual operating conditions of wind turbine, fuzzy pid control strategy is added. Combined with the simulation model of the system, the control effect is tested in the simulation environment. Considering the complexity of the hydraulic system, the hydraulic simulation tool DSHplus is used to build the system model. The control effect of hydraulic system is tested again by using the method of combined simulation with Simulink and the fuzzy pid controller program written in MATLAB.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TM315;TH137

【參考文獻】

相關期刊論文 前9條

1 宋建秀;吉天平;許力偉;;兆瓦級風力發電機組變槳距系統[J];大功率變流技術;2011年01期

2 劉瑋;董慕杰;張小勇;萬偉;;基于能量傳遞函數法的風電機組液壓變槳距系統的建模及仿真[J];電氣技術;2010年10期

3 孫濤;秦錄芳;;風力機變槳距的模糊PID參數自整定控制[J];機床與液壓;2011年10期

4 高軍浩;楊國平;陳博;;基于DSHplus的機床速度換接回路建模與仿真[J];機床與液壓;2011年21期

5 王樹強,劉紹杰;兆瓦級風力發電機液壓變槳距系統設計及建模[J];沈陽工業學院學報;2004年01期

6 周鶴良;;我國風力發電產業發展前景與策略[J];上海電力;2007年01期

7 李強,姚興佳,陳雷;兆瓦級風電機組變槳距機構分析[J];沈陽工業大學學報;2004年02期

8 陳建華;萬保中;王偉曉;曹明W，

本文編號：1993908