本文選題：非對稱齒廓 + 圓弧線圓柱齒輪��； 參考：《建設機械技術與管理》2016年11期

【摘要】：采用雙面刀盤加工方法,基于假想產形齒條的概念,模擬產形齒條與被加工齒輪嚙合過程,推導出非對稱圓弧線圓柱齒輪齒面方程。通過Matlab實現齒面的數值仿真與可視化。將有限元網格模型導入ABAQUS中,比較了兩組非對稱齒廓與對稱齒廓的應力結果,證明采用非對稱齒廓可以提高齒根彎曲強度。另外,對三組不同刀盤半徑的有限元結果進行了比較,分析刀盤半徑大小對應力的影響,結果證明刀盤半徑增大可以減小齒輪副接觸應和彎曲應力。
[Abstract]:Based on the concept of hypothetical shaped rack, the meshing process between shaped rack and machined gear is simulated, and the tooth surface equation of asymmetric circular arc line cylindrical gear is deduced by using the method of double-face cutter head machining. The numerical simulation and visualization of tooth surface are realized by Matlab. The finite element mesh model was introduced into ABAQUS and the stress results of two groups of asymmetric tooth profiles and symmetrical tooth profiles were compared. It was proved that the bending strength of tooth roots could be improved by using asymmetric tooth profiles. In addition, three groups of finite element results of different cutter head radius are compared, and the influence of cutter head radius on stress is analyzed. The results show that the increase of cutter head radius can reduce the contact stress and bending stress of gear pair.
【作者單位】： 長安大學工程機械學院;
【基金】：陜西省自然科學基礎研究計劃資助項目(2015JQ5162)
【分類號】：TH132.41
，

本文編號：1830990