發布時間：2018-04-14 18:57

  本文選題：板材上料機 + 多目標　； 參考：《現代制造工程》2016年06期

【摘要】：將有限元分析方法和優化設計理論相結合,以AWE軟件為工具,對提出的板材上料機的末端執行器的重要部件——吸盤支架進行有限元仿真和優化。通過對超靜定平衡方程的求解,獲取了吸盤支架的載荷,并在AWE軟件中作為邊界條件對吸盤支架進行靜態特性分析。在DOE模塊中建立尺寸優化模型,以吸盤支架柔度最小、質量最輕為目標,以基體和壓板的空間限制為約束條件,通過基于實驗技術的多目標驅動優化方法,實現對吸盤支架尺寸參數的優化設計。最終獲取了一種剛性、質量最優化的吸盤支架設計方案,并為板材上料機的尺寸優化提供了可靠的參考依據。
[Abstract]:The finite element analysis method is combined with the theory of optimal design. The finite element simulation and optimization of the chuck bracket, an important part of the end actuator of the plate feeder, is carried out by using AWE software.By solving the statically indeterminate equilibrium equation, the load of the sucker bracket is obtained, and the static characteristics of the sucker bracket are analyzed as boundary conditions in AWE software.The dimension optimization model is established in DOE module. The minimum flexibility and the lightest mass of the sucker bracket are taken as the target, and the space limitation of the matrix and the pressure plate is taken as the constraint condition. The multi-objective driven optimization method based on the experimental technology is adopted.The optimum design of the dimension parameters of the sucker bracket is realized.Finally, a rigid and optimal design scheme of sucker support is obtained, and a reliable reference is provided for the dimension optimization of plate feeding machine.
【作者單位】： 山東大學機械工程學院;山東大學高效潔凈機械制造教育部重點實驗室;
【基金】：山東省科技發展計劃項目(2012GGE27113)
【分類號】：TH237.1
，

本文編號：1750590