本文選題：儀表總線　切入點：主機　出處：《電子技術應用》2017年01期 　論文類型：期刊論文

【摘要】：M-BUS(儀表總線)以遠程供電及自由拓撲等特點被廣泛應用于儀表或者傳感器的通信中,而其帶負載能力和接收處理能力是限制其應用范圍的兩個關鍵因素,為此,對現有的一種高驅動主機發送電路和傳統的主機接收電路分別進行改進。發送電路通過調整電路結構,增加MOS管驅動電路和柵極保護電路,完善電路的關閉功能,從而在保持高驅動的同時,提高了電路運行的可靠性;接收電路采用差動運放對接收信號進行預處理再比較,提高了電路對變化負載的適應性和抗干擾能力。對改進后的發送電路和接收電路分別進行對比仿真,結果顯示其收發性能均得到改善。
[Abstract]:M-BUS (instrument bus) is widely used in the communication of instrument or sensor with the characteristics of remote power supply and free topology, and its load capacity and receiving and processing ability are the two key factors limiting its application scope. The existing high drive host transmission circuit and the traditional host receiving circuit are improved respectively. By adjusting the circuit structure, the transmission circuit increases the MOS transistor drive circuit and the gate protection circuit, and improves the circuit closing function. Thus, the reliability of the circuit is improved while maintaining the high drive, and the receiving circuit uses differential operational amplifier to preprocess and compare the received signal. The adaptability of the circuit to the variable load and the ability of anti-interference are improved. The comparison and simulation of the improved transmission circuit and the receiving circuit show that the transceiver performance is improved.
【作者單位】： 合肥工業大學電子科學與應用物理學院;
【基金】：安徽省科技攻關項目(1501041138)
【分類號】：TP334.7
，

本文編號：1648498