雙級時效在鑄造Mg-3Nd-0.2Zn-Zr（wt.%）鎂合金中的應用（英文）
發布時間：2021-02-10 16:52
研究了常規雙級時效處理工藝（先低溫160℃,后高溫200℃）和反雙級時效處理工藝（先高溫200℃,后低溫160℃）對低壓砂型鑄造Mg-3Nd-0.2Zn-Zr（NZ30K）（wt.%）鎂合金的硬度和室溫拉伸性能的影響。結果表明,常規雙級時效處理對提高NZ30K合金的屈服強度效果不明顯,而反雙級時效處理能明顯提高NZ30K合金的屈服強度。經200℃×16h+160℃×64h反雙級時效處理后,NZ30K合金獲得最佳綜合力學性能,硬度和屈服強度分別為75.7HV和161MPa。
【文章來源】：材料科學與工程學報. 2020,38(04)北大核心
【文章頁數】：8 頁
【文章目錄】：
1 Introduction
2 Experimental procedure
3 Results and Discussion
3.1 Microstructure
3.2 Hardness
3.2.1 Hardness evolution during single-step aging treatment
3.2.2 Hardness evolution during conventional twostep aging treatment
3.2.3 Hardness evolution during reverse two-step aging treatment
3.3 Tensile properties
3.4 Discussion
4 Conclusion
本文編號：3027682
【文章來源】：材料科學與工程學報. 2020,38(04)北大核心
【文章頁數】：8 頁
【文章目錄】：
1 Introduction
2 Experimental procedure
3 Results and Discussion
3.1 Microstructure
3.2 Hardness
3.2.1 Hardness evolution during single-step aging treatment
3.2.2 Hardness evolution during conventional twostep aging treatment
3.2.3 Hardness evolution during reverse two-step aging treatment
3.3 Tensile properties
3.4 Discussion
4 Conclusion
本文編號：3027682
本文鏈接：http://www.sikaile.net/kejilunwen/jinshugongy/3027682.html
最近更新
教材專著
