體外浸泡純鈦的表面腐蝕和ECAP的影響
發布時間：2018-11-26 07:53
【摘要】：采用在Ringer模擬體液靜態體外浸泡的方法,研究工業純鈦試片經過一定時間的浸泡后的失重和表面形貌的變化。采用等通道徑角擠壓(ECAP)方法處理工業純鈦并與粗晶純鈦進行對比,對ECAP處理的TA9和粗晶TA9也做了對比。結果表明:純鈦在400℃ECAP處理后的微觀組織形成具有明顯方向性的板條狀組織,ECAP純鈦表面沉積的Na Cl晶體數量大于粗晶Ti,TA9也表現出相似結果。純鈦的腐蝕機制是一種受到電偶腐蝕控制的均勻腐蝕,細晶組織導致電偶的數量增加。
[Abstract]:The weight loss and surface morphology of the commercial pure titanium specimen after immersion for a certain time were studied by the method of static immersion in Ringer simulated body fluid in vitro. The industrial pure titanium was treated by equal channel angular extrusion (ECAP) and compared with coarse pure titanium. The TA9 and TA9 treated by ECAP were also compared. The results show that the microstructures of pure titanium treated at 400 鈩，
本文編號：2357861
[Abstract]:The weight loss and surface morphology of the commercial pure titanium specimen after immersion for a certain time were studied by the method of static immersion in Ringer simulated body fluid in vitro. The industrial pure titanium was treated by equal channel angular extrusion (ECAP) and compared with coarse pure titanium. The TA9 and TA9 treated by ECAP were also compared. The results show that the microstructures of pure titanium treated at 400 鈩，
本文編號：2357861
本文鏈接：http://www.sikaile.net/kejilunwen/jinshugongy/2357861.html
最近更新
教材專著
