本文選題：干硬切削 + 白層��； 參考：《機械工程學報》2015年17期

【摘要】：干硬切削加工過程中產生的表面白層對零件的使用性能和使用壽命有很大影響,對白層厚度進行準確的定量預測具有重要的理論意義與應用價值�；诓牧系幕瘜W(xué)熱力學基本理論,對切削過程中合金元素、應力、應變等因素耦合影響下的奧氏體相變溫度進行了理論推導,根據計算出的相變溫度和有限元的模擬結果,建立了基于相變形成相理的白層厚度預測模型。GCr15淬硬鋼試驗結果與預測結果對比分析表明,本模型適用于熱力耦合占主導地位的切削過程,該模型能夠在考慮了熱-力耦合因素的情況下更為準確地預測出干硬切削表面相變白層的厚度。
[Abstract]:Based on the basic theory of chemical thermodynamics of materials , the austenite phase transition temperature under the influence of factors such as alloy elements , stress , strain and other factors in cutting process is theoretically deduced . Based on the calculated phase transition temperature and the simulation results of finite element , a white layer thickness prediction model based on phase change is established . The results of the experiment and prediction results show that the model is suitable for the cutting process dominated by thermal coupling . The model can predict the thickness of the phase change white layer of the dry hard cutting surface more accurately under the condition of considering the thermal - force coupling factor .
【作者單位】： 大連理工大學機械工程學院;上海航天設備制造總廠;
【基金】：國家自然科學基金資助項目(51375072)
【分類號】：TG506

【參考文獻】

相關期刊論文 前5條

1 張凌飛,張弘_";硬態車削表面白層厚度的影響因素分析[J];工具技術;2004年11期

2 曹永泉;張弘_";李Z，

本文編號：1929763