本文選題：AZB鎂合金 + 單點溫漸進成形　； 參考：《稀有金屬材料與工程》2015年03期

【摘要】：研究并掌握鎂合金板材在不同工藝參數條件下的漸進成形規律對完善鎂合金單點溫漸進成形工藝有著重要的理論和實際應用價值。以變錐角圓臺件為研究對象,以有限元軟件ANSYS/LS-DYNA為工具,以成形件的等效應力、減薄率和板厚變化為研究指標,研究了不同工藝參數:成形溫度、摩擦條件和工具頭直徑對AZ31B鎂合金板材單點溫漸進成形的影響。結果表明:在成形溫度為250℃,靜摩擦系數為0.2、動摩擦系數為0.1,工具頭直徑在10~12 mm范圍內,AZ31B鎂合金板材具有良好的單點漸進成形性能。
[Abstract]:It is of great theoretical and practical value to study and master the progressive forming law of magnesium alloy sheet under different technological parameters for perfecting the single point temperature progressive forming process of magnesium alloy. Taking the variable cone angle table as the research object, using the finite element software ANSYS/LS-DYNA as the tool, taking the equivalent stress, thinning rate and the change of the plate thickness of the forming part as the research indexes, the different process parameters are studied: forming temperature, forming temperature, forming temperature, forming temperature, forming temperature, forming temperature, forming temperature, forming temperature, forming temperature Effects of friction conditions and tool head diameter on single point temperature progressive forming of AZ31B magnesium alloy sheet. The results show that when the forming temperature is 250 鈩，

本文編號：1776324