本文關鍵詞： 黑皮鋼 510L汽車大梁鋼 免酸洗 氧化鐵皮 動力學　出處：《河北科技大學》2016年碩士論文　論文類型：學位論文

【摘要】：免酸洗技術是一種省略傳統酸洗工藝對熱軋帶鋼表面氧化鐵皮進行處理的技術。該技術的氧化鐵皮主要以Fe3O4為主相,結構致密緊湊,在后續深加工過程中與鋼板一起變形而不脫落,下游企業及用戶在使用時可不經酸洗處理直接沖壓使用,從而實現免酸洗功能。本文主要研究了熱軋卷板(510L汽車大梁鋼)的氧化鐵皮存在形態、影響因素、形成機理等內容。在氧化動力學模型及FeO共析反應等試驗結果和模擬結果基礎上,進行了二次工業性試制,成功開發出滿足汽車行業用戶要求的高級別510L免酸洗黑皮鋼。最終確定了加熱爐出爐溫度為1200℃,粗軋前除鱗壓力為190 bar,精軋前除鱗壓力為160bar,F7架精軋出口溫度為880℃,甩尾速度采用13m/s的“高溫、快軋”工藝路線。同時,通過對兩次工業試制產品結果進行性能檢測分析,發現各項性能指標能夠滿足510L鋼國標要求及下游用戶的沖壓使用要求,且性能穩定。在鋼板不經過酸洗情況下直接沖壓成結構件進行使用,鋼板表面氧化鐵皮不脫落,表面質量和性能指標均滿足用戶要求,適合工業性生產和推廣使用。
[Abstract]:The no-acid pickling technology is a kind of technology which omits the traditional pickling technology to treat the surface oxidized iron sheet of hot rolled strip. The main phase of this technology is Fe3O4, the structure is compact and compact. In the subsequent deep processing process with steel plate deformation without falling off, downstream enterprises and users in the use of direct stamping without pickling treatment, In order to realize the function of no-pickling, this paper mainly studies the existing form of oxidized iron sheet and the influencing factors of hot rolled coiling plate (510L automobile beam steel). Based on the oxidation kinetic model, FeO eutectoid reaction and simulation results, the secondary industrial trial production was carried out. A high grade 510L acid-free black leather steel has been successfully developed to meet the requirements of the automobile industry. The outlet temperature of heating furnace is 1200 鈩，

本文編號：1513211