【摘要】：本文以克服現有汽車搬運器存在的技術缺陷和獲得新型汽車搬運器的創新設計方案為目的,在深入研究TRIZ理論和分析用戶需求的基礎上,針對產品創新設計目標的生成,創新設計問題的解決和創新設計方案的形成,利用TRIZ問題分析模式、“進化橋”和“參數橋”提出新型汽車搬運器的創新設計方案,并對獲得的創新設計方案進行評價。 在研究用戶需求和TRIZ理論的基礎上,提出用戶需求研究與功能分析、資源分析、因果分析相結合,獲得基于用戶需求研究和TRIZ問題分析模式的創新設計目標生成模型,并成功應用該模型確定了汽車搬運器的創新設計方向。 在研究技術進化理論的基礎上,基于TRIZ "進化橋”提出產品進化路線的研究過程模型。將該模型用于汽車搬運器的進化分析,獲得汽車搬運器沿10條重要進化路線的進化過程,并指出汽車搬運器沿每條進化路線所處的目前技術狀態和未來潛力狀態,對未來汽車搬運器的研發有一定的指導作用。 在研究]TRIZ理論的常用解題工具的基礎上,針對現有夾持輪胎式汽車搬運器存在的缺陷,提出應用TRIZ'‘參數橋”解決設計過程中遇到技術難題的過程模型。應用該模型解決新型汽車搬運器設計過程中遇到的技術沖突并提出新的設計方案。針對現有汽車搬運器缺少車輛位置調整的功能,提出位置調整裝置和新型汽車搬運器的配套使用方案。針對液壓托舉的缺陷,提出新型托舉式汽車搬運器的創新設計方案。 最后,對獲得的創新方案進行評價和總結,獲得的創新設計方案對未來汽車搬運器的研發有一定的參考價值。
[Abstract]:In order to overcome the technical defects existing in the present vehicle conveyer and to obtain the innovative design scheme of the new type of vehicle conveyer, based on the in-depth study of the TRIZ theory and the analysis of the customer's demand, this paper aims at the generation of the product innovation design goal. The solution of innovative design problem and the formation of innovative design scheme are discussed. Using the TRIZ problem analysis model, the "evolutionary bridge" and "parameter bridge" are used to propose the innovative design scheme of the new type of vehicle conveyer, and the evaluation of the innovative design scheme obtained is carried out. Based on the research of user demand and TRIZ theory, this paper puts forward the combination of user demand research and function analysis, resource analysis, causality analysis, and obtains a new design goal generation model based on user demand research and TRIZ problem analysis model. The innovative design direction of the vehicle handling device is determined by using the model successfully. On the basis of studying the theory of technological evolution, the research process model of product evolution route is proposed based on TRIZ "evolutionary bridge". The model is applied to the evolutionary analysis of the vehicle conveyer, and the evolution process of the vehicle conveyor along 10 important evolutionary routes is obtained, and the present technical state and the future potential state of the vehicle conveyor along each evolutionary route are pointed out. It has a certain guiding function to the future research and development of the vehicle handling device. Based on the study of the common tools for solving problems in TRIZ theory, a process model for solving the technical problems encountered in the design process by using Triz 'parametric bridge "is put forward in view of the defects existing in the existing gripper truck conveyors. The model is applied to solve the technical conflicts encountered in the design of the new type of vehicle conveyer and a new design scheme is proposed. In view of the lack of the function of the vehicle position adjustment in the present vehicle conveyer, the matching usage scheme of the position adjusting device and the new type of vehicle handling device is put forward. In view of the defects of hydraulic lift, the innovative design scheme of the new type of lift car conveyer is put forward. Finally, the innovative design scheme is evaluated and summarized, which has some reference value for the future research and development of vehicle handling device.
【學位授予單位】：山東建筑大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U491.71

【參考文獻】

相關期刊論文 前10條

1 韓彥良;曲芬霞;;TRIZ理論在植物組織培養技術中的應用研究[J];安徽農業科學;2011年28期

2 熊開封;張華;崔鵬;;我國TRIZ理論研究綜述[J];包裝工程;2009年11期

3 楊燕;邵云飛;;TRIZ方法在構建大學生創新能力評價指標體系中的應用[J];電子科技大學學報(社科版);2009年03期

4 李中凱;朱真才;謝蕾;劉新華;;參數化產品族的通用性與性能權衡評價方法[J];中國工程機械學報;2010年01期

5 趙文燕;張換高;檀潤華;何楨;;TRIZ在管理流程優化中的應用[J];工程設計學報;2008年02期

6 韓立芳;張明勤;李海青;臧德江;石海龍;;基于TRIZ的新型立體車庫創新設計[J];工程設計學報;2008年02期

7 張建輝;檀潤華;楊伯軍;陳子順;;產品技術進化潛力預測研究[J];工程設計學報;2008年03期

8 呂桂志;任工昌;丁濤;;基于TRIZ技術進化分析點膠機的演進[J];工程設計學報;2008年05期

9 單鴻波;葛濱;于海燕;孫志宏;;面向概念設計的用戶需求獲取體系及過程機制[J];東華大學學報(自然科學版);2012年05期

10 吳建;;TRIZ理論在搜索引擎創新設計中的應用研究[J];重慶郵電大學學報(自然科學版);2012年06期

，

本文編號：2170823