【摘要】：介紹了發電機定子鐵心用通風槽鋼生產工藝,針對通風槽鋼切斷和彎形工序,設計了一種新型的切斷彎形工藝,在一副模具上同時完成切斷、彎形、整形3道工序。在分析槽鋼切斷彎形特點及其變形規律的基礎上,對槽鋼成型過程做出合理簡化,建立分析模型,利用有限元軟件對槽鋼切斷彎形進行了三維有限元數值模擬分析,得出了槽鋼在成形過程中的幾何變形情況。對不同沖頭形狀進行了對比分析,并在實際生產中很好的控制了槽鋼切斷后存在的塌肩、毛刺等缺陷。
[Abstract]:The production process of ventilated channel steel for stator core of generator is introduced. A new type of cutting and bending process is designed aiming at the cutting and bending process of ventilated channel steel. Three processes of cutting, bending and shaping are carried out simultaneously on a set of dies. On the basis of analyzing the characteristics of channel cutting bending and its deformation law, the forming process of channel steel is reasonably simplified, the analysis model is established, and the three-dimensional finite element numerical simulation of channel steel cutting bending is carried out by using finite element software. The geometric deformation of channel steel in forming process is obtained. The different punch shapes are compared and analyzed, and the defects such as shoulder sloughing and burr are well controlled in actual production.
【作者單位】： 四川工程職業技術學院材料工程系;
【基金】：四川省2016年大學生創新創業項目(201612763002)
【分類號】：TG306

【相似文獻】

相關期刊論文 前5條

1 朱希明;兩邊不對稱的直角彎形件彎形模[J];航空工藝技術;1986年02期

2 張春凱;關于“彎形”課題教學程序的設計思考[J];現代技能開發;2001年10期

3 陳蔭平;擺動塊彎形模的設計和計算[J];模具工業;1989年06期

4 張明光;郭彥;;棒料彎形的工藝改進[J];金屬加工(冷加工);2013年02期

5 張明光;程軍榮;朱愛華;;波形曲面彎形加工的處理方法[J];金屬加工(冷加工);2010年02期

，

本文編號：2360587