【摘要】：研究了1100鋁合金中添加不同質量分數(0.4%,0.2%,0.1%)的Al-Ti-B細化劑和在鑄軋過程中施加電磁振蕩場對鑄軋板坯組織細化的影響.結果發現,在添加相同含量的Al-Ti-B條件下,鑄軋過程中施加電磁振蕩場的板坯組織細化效果明顯高于普通鑄軋的板坯.同時發現,細化劑的質量分數在0.1%~0.4%范圍內,在鑄軋過程中施加電磁振蕩場,其細化效果都比較滿意,其顯微組織優于常規鑄軋?zhí)砑?.4%細化劑的組織,因此,電磁振蕩鑄軋可以大幅度降低細化劑的用量,減少元素偏析,改善鑄軋坯的內部質量.
[Abstract]:The effect of adding 0.1% Al-Ti-B refiner with different mass fraction in 1100 aluminum alloy and electromagnetic oscillation field during casting and rolling on the microstructure refinement of slab casting was studied. The results show that the microstructure refinement effect of the slab subjected to electromagnetic oscillation field in the process of casting is higher than that of the ordinary slab casting under the condition of adding the same content of Al-Ti-B. At the same time, it is found that when the mass fraction of the refiner is 0.1% and the electromagnetic oscillation field is applied in the process of casting and rolling, the refining effect is satisfactory, and its microstructure is better than that of the conventional casting rolling with 0.4% fining agent. Therefore, electromagnetic oscillation casting can greatly reduce the amount of refiner, reduce element segregation, and improve the internal quality of casting and rolling billet.
【作者單位】： 東北大學材料電磁過程研究教育部重點實驗室;
【基金】：廣東省產學研項目(2013B090600015,2013B090200008)
【分類號】：TG146.21;TG335.9

【參考文獻】

相關期刊論文 前3條

1 蘇鑫;許光明;;電磁場對5052鋁合金鑄軋板材組織性能的影響[J];東北大學學報(自然科學版);2014年06期

2 肖政兵;鄧運來;唐建國;陳祺;張新明;;Al-Ti-C與Al-Ti-B晶粒細化劑的Zr中毒機理[J];中國有色金屬學報;2012年02期

3 劉曉波;許慶彥;荊濤;柳百成;;Microstructure of aluminum twin-roll casting based on Cellular Automation[J];Transactions of Nonferrous Metals Society of China;2008年04期

【共引文獻】

相關期刊論文 前10條

1 許光明;潘江深;;電磁場對1100鋁合金鑄軋板材組織的影響[J];東北大學學報(自然科學版);2017年07期

2 趙炳怡;蔡啟舟;李欣蔚;李冰;程婧t，

本文編號：2357807