本文選題：CrNiNb　切入點：抗氧化性　出處：《熱加工工藝》2017年24期 　論文類型：期刊論文

【摘要】：采用增重法對Cr26Ni14Nb2奧氏體耐熱鋼的抗氧化性能進行研究,并用XRD、SEM對氧化膜的組成及結構進行了分析。結果表明,冷卻方式對Cr26Ni14Nb2鋼在不同溫度下的氧化膜構成影響不大,主要成分均為Cr_2O_3及尖晶石結構的物質,但溫度超過950℃后,氧化膜中出現了Fe_2O_3、Fe_3O_4,且隨溫度升高它們的數量增加;三種冷卻方式的試樣,在850、950℃加熱時,均具有較好的抗氧化性能;在1050℃加熱時,空冷試樣具有更好的抗氧化性。
[Abstract]:The oxidation resistance of Cr26Ni14Nb2 austenitic heat-resistant steel was studied by weight gain method, and the composition and structure of the oxide film were analyzed by XRD-SEM. The results showed that the cooling mode had little effect on the composition of oxide film of Cr26Ni14Nb2 steel at different temperatures. The main components are Cr_2O_3 and spinel structure substances, but when the temperature is over 950 鈩，

本文編號：1583206