本文關鍵詞：熱處理工藝對壓力容器鋼板組織和性能的影響　出處：《包鋼科技》2016年06期 　論文類型：期刊論文

  更多相關文章： 熱處理 高強度壓力容器鋼板 組織 性能

【摘要】：文章以包鋼生產的07系列壓力容器鋼為實驗材料,進行了調質熱處理工藝研究,探討了淬火溫度、時間及回火溫度對實驗鋼組織和性能的影響。最終確定了不同厚度規格實驗鋼板的淬火溫度為900~920℃,回火溫度則根據厚度控制在600~650℃,研究結果為實際生產中熱處理工藝的制定提供了理論依據。
[Abstract]:In this paper, the quenching and tempering process of 07 series pressure vessel steel produced by Baotou Iron and Steel Co., Ltd is studied, and the quenching temperature is discussed. The effect of time and tempering temperature on the microstructure and properties of the experimental steel was studied. Finally, the quenching temperature of the steel plate with different thickness was determined to be 900 ~ 920 鈩，

本文編號：1378912