Three phase Pebax^? MH 1657/PEG-ran-PPG/CuBTC（polymer/liquid/solid） was successfully deposited as a selective layer on a porous Polysulfone（PSF） support. In fact, the beneficial properties of PEG（high selectivity） with those of PPG（high permeability, amorphous） have been combined with superior properties of mixed matrix membrane（MMMs）. The membranes were characterized by DSC, TGA and SEM, while CuBTC was characterized by CO₂ and CH₄adsorption test. Statistically b... 

【文章頁(yè)數(shù)】：10 頁(yè)

【文章目錄】：
1. Introduction
2. Experimental
    2.1. Materials
    2.2. Membrane preparation
    2.3. MOF and membrane characterization
    2.4. Gas permeation measurements
    2.5. Experimental design
3. Results and discussion
    3.1. Gas adsorption characteristics
    3.2. Thermal properties
    3.3. Statistical analysis
    3.4. CO2permeance
    3.5. CO2/CH4ideal selectivity
    3.6. Optimization and verification of the models
    3.7. Effect of feed pressure on the performance of composite membranes
4. Conclusions



本文編號(hào)：3688414