稻殼加入量對氧化鋁多孔材料的性能及結構的影響
發布時間:2018-11-04 20:42
【摘要】:為了研究稻殼造孔劑對氧化鋁多孔材料性能的影響,以粒度≤0.074和≤0.045 mm的板狀剛玉粉、d50=2μm的α-Al_2O_3微粉、d50=5μm的ρ-Al_2O_3微粉和粒度≤0.045 mm的金屬鋁粉為主要原料,通過添加不同量的稻殼(≤0.045 mm質量分數分別為0、5%、10%、15%、20%、25%和30%)為造孔劑,分別在1 450、1 500、1 550和1 600℃保溫3 h燒后制備了氧化鋁質多孔材料。對燒后的試樣進行了體積密度、顯氣孔率、熱導率和高溫力學性能的檢測,采用XRD進行了物相組成分析,借助掃描電鏡對燒后試樣的顯微結構和孔結構進行了分析表征。結果表明:稻殼的添加會對氧化鋁多孔材料的孔結構、熱導率以及力學性能產生顯著影響。隨著稻殼添加量的增加,試樣的顯氣孔率和平均孔徑逐漸增大,相應的熱導率逐漸減小。但由于稻殼燒失后殘留下的Na_2O以及K_2O等雜質在高溫下會形成液相,這也導致了材料高溫抗折強度和荷重軟化溫度顯著降低。
[Abstract]:In order to study the effect of rice husk pore-making agent on the properties of alumina porous materials, the plate-like corundum powder with particle size 鈮,
本文編號:2311079
[Abstract]:In order to study the effect of rice husk pore-making agent on the properties of alumina porous materials, the plate-like corundum powder with particle size 鈮,
本文編號:2311079
本文鏈接:http://www.sikaile.net/kejilunwen/huaxuehuagong/2311079.html
最近更新
教材專著