【摘要】：以不經任何處理的微硅粉作為硅鋁源,固相合成ZSM-5分子篩,考察晶化溫度、晶化時間、微硅粉用量、模板劑用量、氯化銨用量等因素對合成分子篩的影響。采用XRD、XRF、IR、SEM、等手段進行分析表征。結果表明最適宜的合成條件:晶化溫度為160℃,晶化時間為24 h,按n(TPABr)∶n(NH_4~+)∶n(SiO_2)∶n(H_2O)=0.10∶0.90∶1.00∶4.60,稱取適量模板劑、氯化銨、微硅粉和微硅粉。該法合成的ZSM-5分子篩結晶度高、晶形完備、具有豐富的孔結構、較大的比表面積和優良的熱穩定性,可以作為工業催化劑和吸附劑使用。
[Abstract]:ZSM-5 molecular sieve was synthesized by solid phase synthesis using microsilica powder without any treatment. The effects of crystallization temperature, crystallization time, the amount of microsilica powder, the amount of template and ammonium chloride on the synthesis of molecular sieve were investigated. XRD,XRF,IR,SEM, and other methods were used for analysis and characterization. The results show that the optimum synthesis conditions are as follows: crystallization temperature 160 鈩，

本文編號：2263511