發布時間：2018-05-09 19:16

  本文選題：鍍銀 + 直線電機　； 參考：《電鍍與精飾》2017年05期

【摘要】：傳統半自動電鍍生產線在銅件表面鍍銀過程中,由于自動化程度較低,對各工藝環節的時間控制精度差,導致銀鍍層厚度、致密度、電導率和光亮度指標不穩定。設計一種銅件鍍銀生產線中直線電機自動驅動系統,首先設定不同的活化、浸銀和電鍍銀等工序的時間,進行實驗,提取不同時間下銀鍍層的厚度、電導率和光亮度指標;通過對比,選取各工序最優的控制時間,作為直線電機自動驅動系統硬件和參數設定的依據;軟件流程采用智能PLC與單神經元控制相結合的算法,實現銅件表面鍍銀過程的自動化控制。實驗證明,該設計系統能夠精確的控制時間并精準定位,改善銀鍍層電導率和光亮度。
[Abstract]:In the process of silver plating on copper surface of traditional semi-automatic electroplating production line, because of the low automation degree and the poor time control precision of each technological link, the thickness, density, conductivity and luminance index of silver coating are unstable. A kind of automatic driving system of linear motor in silver plating production line for copper parts is designed. Firstly, different time of activation, silver immersion and silver plating are set up, and the thickness, conductivity and luminance index of silver coating are extracted at different time. Through comparison, the optimal control time of each process is selected as the basis for setting the hardware and parameters of the linear motor automatic drive system, and the software flow is based on the combination of intelligent PLC and single neuron control. Automatic control of silver plating process on copper surface is realized. Experiments show that the system can accurately control the time and position accurately, and improve the conductivity and brightness of silver coating.
【作者單位】： 河南廣播電視大學機電學院;機械工業第六設計研究院有限公司;
【基金】：2014年度河南省重點科技攻關課題(142102210416)
【分類號】：TQ153.16

【相似文獻】

相關期刊論文 前1條

1 陳發偉;張永革;;直線電機在浮法玻璃生產中的應用[J];玻璃;2008年11期

，

本文編號：1867088