本文選題：Wurster + 流化床��； 參考：《工程熱物理學報》2017年03期

【摘要】：為研究Wurster流化床內顆粒流動規律,本文利用12-4-8組合電極電容層析成像(Electrical Capacitance Tomography,ECT)傳感器對Wurster流化床冷態實驗和加濕實驗過程進行監測,得到了ECT重構圖像以及顆粒濃度時變曲線。首先,根據冷態實驗數據比較了不同操作條件下流化床內顆粒流態和濃度波動特性;在此基礎上,通過加濕實驗數據分析了包衣液流率對于顆粒流動的影響。本文研究表明,ECT傳感器適用于Wurster流化床過程關鍵參數在線測量和故障診斷,從而為反應過程的優化提供支持。
[Abstract]:In order to study the law of particle flow in the Wurster fluidized bed, this paper uses the 12-4-8 composite electrode capacitance tomography (Electrical Capacitance Tomography, ECT) sensor to monitor the cold experiment and humidifying process of the Wurster fluidized bed, and obtains the reconstructed image of ECT and the time variation curve of the particle concentration. First, according to the cold experimental data ratio. Compared with the characteristics of the particle flow and concentration fluctuation in the fluidized bed under different operating conditions, the effect of the flow rate of coating liquid on the particle flow is analyzed by the experimental data of humidification. The study shows that the ECT sensor is suitable for the on-line measurement and fault diagnosis of the key parameters of the Wurster fluidized bed, thus the optimization of the reaction process. Provide support.
【作者單位】： 中國科學院工程熱物理研究所;中國科學院大學;
【基金】：國家自然科學基金資助項目(No.61320106004,No.61374018)
【分類號】：TQ051.13
，

本文編號：2019348