本文選題：重力熱管 + 余熱回收�。� 參考：《制冷學報》2017年02期

【摘要】：本文以丙酮為工作流體,設計了一套新型重力熱管換熱器,該裝置由五根底部連通的垂直蒸發管共用一根水平同心套管冷凝管構成。采用理論和實驗相結合的研究方法,分析了裝置的傳熱性能,并對其結構參數進行優化。研究了當傾斜角度為15°~90°、操作溫度為40~80℃、冷卻水溫度為10~30℃時裝置的傳熱性能。結果表明:新型重力熱管換熱器具有良好的等溫性能及操作穩定性;當充液率為15%、傾斜角度為60°、冷卻水溫度為30℃時,換熱器達到最佳工作狀態;最大傳熱量可達1 700 W左右,此時平均熱阻為0.042℃/W。
[Abstract]:A new type of gravity heat pipe heat exchanger is designed with acetone as the working fluid. The device is composed of five vertical evaporative tubes connected at the bottom and one horizontal concentric casing condensate tube. The heat transfer performance of the device is analyzed by combining theory and experiment, and its structural parameters are optimized. The heat transfer performance of the device is studied when the tilt angle is 15 擄~ 90 擄, the operating temperature is 40 ~ 80 鈩，

本文編號：1969635