UHPC水化熱對功能梯度組合梁早期收縮開裂的影響
發(fā)布時間:2018-05-19 03:02
本文選題:水化熱 + 超高性能混凝土; 參考:《硅酸鹽通報》2017年01期
【摘要】:以UHPC厚度為基本參量,進行了UHPC-NC功能梯度組合梁水泥水化階段構件截面溫度場和混凝土收縮性能的實驗研究。研究表明:當UHPC厚度超過20 mm時,截面中心和外緣的溫差達到5.6℃,由溫差引起的最大拉應力值為3.36 MPa,組合梁水化熱產(chǎn)生的溫度應力不可忽略。在試驗研究的基礎上,提出了考慮UHPC層厚度影響的UHPC-NC功能梯度組合梁溫度應力的計算方法,并將計算結果與試驗結果進行了對比,兩者吻合較好,具有一定的工程應用價值。
[Abstract]:Taking the thickness of UHPC as the basic parameter, the temperature field of the section and the shrinkage behavior of concrete in the cement hydration stage of UHPC-NC functionally gradient composite beam were studied. The results show that when the thickness of UHPC is more than 20 mm, the temperature difference between the center and outer edge of the section reaches 5.6 鈩,
本文編號:1908407
本文鏈接:http://www.sikaile.net/kejilunwen/huagong/1908407.html
教材專著