單軸加載下混凝土超聲波與聲發射聯合特性試驗研究
發布時間:2018-05-08 06:16
本文選題:混凝土 + 聲發射。 參考:《河北農業大學學報》2017年03期
【摘要】:本研究通過混凝土試件在單軸向受壓下的試驗研究,對比了不同強度等級立方體和棱柱體試件對超聲波波速的影響,分析超聲波及聲發射參數隨應力的變化關系。試驗結果表明:強度等級越高的混凝土超聲波波速時間穩定性表現越好;棱柱體超聲波穩定性優于立方體試件;在工作應力為極限破壞應力的20%~70%階段,超聲波波速下降緩慢,聲發射撞擊數增加,能量和振鈴計數呈突發式增長;當工作應力大于混凝土的極限破壞應力70%后,超聲波波速明顯下降,聲發射活動急劇增加。提出劃分應力階段對2種檢測方法進行分析,為混凝土結構工作應力狀態的檢測提供參考。
[Abstract]:Based on the experimental study of concrete specimens under uniaxial compression, the effects of cube and prism on ultrasonic wave velocities are compared, and the relationship between ultrasonic and acoustic emission parameters with stress is analyzed. The experimental results show that the higher the strength grade, the better the time stability of ultrasonic wave velocity of concrete, the better the ultrasonic stability of prism is better than the cube specimen, and when the working stress is 20% of the ultimate failure stress, the ultrasonic wave velocity decreases slowly. When the working stress is more than 70% of the ultimate failure stress of concrete, the ultrasonic wave velocity decreases obviously and the acoustic emission activity increases sharply. Two kinds of testing methods are analyzed in order to provide reference for the detection of the working stress state of concrete structure.
【作者單位】: 河北農業大學城鄉建設學院;
【基金】:河北省科技計劃重點基礎研究項目(15965401D) 河北省高等學?茖W技術研究項目(ZD2015019)
【分類號】:TU528
【相似文獻】
相關期刊論文 前4條
1 神尾昭,高路,楊德麟;3米直徑球形容器聲發射試驗[J];化工煉油機械通訊;1979年01期
2 王信化;;用于評估工藝管道狀況的聲發射檢查方法[J];化工裝備技術;1996年03期
3 廖建國;用聲發射(AE)檢測龜裂發生的位置[J];國外耐火材料;1996年12期
4 ;[J];;年期
,本文編號:1860285
本文鏈接:http://www.sikaile.net/kejilunwen/huagong/1860285.html
教材專著