本文選題：GDC電解質 + 粒徑��； 參考：《陶瓷學報》2017年03期

【摘要】：本文對廣東深圳某廠家生產的Gd_(0.1)Ce_(0.9)O_(1.95)和寧波索福人能源技術有限公司生產的Gd_(0.1)Ce_(0.9)O_(1.95)(D50=32.0μm)兩種不同粒度分布的粉體進行了燒結特性及其電化學性能研究。評價了不同預燒溫度下10GDC粉體的燒成特性,確定了最佳的粉體預燒溫度。測量了不同燒成溫度下(1500℃、1550℃、1600℃)的10GDC電解質片的吸水率、體積密度等參數,并對預燒及球磨前后的粉體進行粒徑分析,通過XRD確定10GDC粉體的晶相;通過SEM觀察燒結體的致密性。結果表明:深圳10GDC粉體1000℃預燒后在1500℃燒結最致密,其相對密度達到98.06%;寧波10GDC在1600℃下燒結最致密,其相對密度達到96.91%。深圳10GDC粉體的活性高于寧波10GDC粉體,其可以在比較低的溫度下獲得致密燒結體。進一步采用交流阻抗譜法在450℃-750℃范圍內測得了兩種10GDC電解質材料的電導率,結果顯示:1500℃燒結的深圳10GDC電解質及1600℃燒結的寧波10GDC電解質總電導的表觀活化能分別為1.42 e V,1.28 e V,在550℃-750℃范圍內寧波10GDC電解質的電導率高于深圳10GDC電解質。由此可知,寧波10GDC材料的電性能較高,其燒結體的離子電導率較高。
[Abstract]:In this paper, the sintering characteristics and electrochemical properties of two kinds of powders with different particle size distribution (GdS) and Gd_(0.1)Ce_(0.9)O_(1.95)(D50=32.0 渭 m, produced by a factory in Shenzhen, Guangdong Province, have been studied.The sintering characteristics of 10GDC powders at different pre-firing temperatures were evaluated and the optimum pre-firing temperature was determined.The water absorption and bulk density of 10GDC electrolytes at different sintering temperatures were measured. The particle size of the powders before and after pre-firing and milling were analyzed, and the crystalline phase of 10GDC powders was determined by XRD.The densification of sintered body was observed by SEM.The results showed that Shenzhen 10GDC powder was sintered at 1500 鈩，

本文編號：1765776