本文選題：安全工程　切入點：氧化誘導期　出處：《安全與環(huán)境學報》2017年05期

【摘要】：以設備腐蝕樣品和均相沉淀樣品為研究對象,運用差示掃描量熱法測定硫鐵化合物的氧化誘導期,并考察了粒徑、升溫速率和空氣流量對硫鐵化合物氧化誘導期的影響。結果表明,兩種樣品在125~200℃范圍內均處于活躍的自熱階段,熱穩(wěn)定性較差,樣品粒徑在44~74μm范圍內,升溫速率越小,空氣流量越大,樣品自燃傾向性越高。
[Abstract]:The oxidation induction period of iron sulfide compounds was determined by differential scanning calorimetry (DSC). The effects of particle size, heating rate and air flow rate on the oxidation induction period of iron sulfide compounds were investigated.The results show that the two kinds of samples are in active autothermal stage in the range of 125 鈩，

本文編號：1713661