發布時間：2018-03-12 19:38

  本文選題：三乙醇胺　切入點：硼酸　出處：《精細化工》2017年02期 　論文類型：期刊論文

【摘要】：以三乙醇胺和硼酸為原料,甲苯為帶水劑,合成了三乙醇胺硼酸酯;以三乙醇胺硼酸酯為前驅體在氨氣氣氛中燒結制得六方氮化硼顆粒。采用FTIR、XRD、SEM、NMR對中間產物和最終產物進行了表征。結果表明:以三乙醇胺硼酸酯為前驅體,在1 200℃下燒結4 h,可制得質量分?jǐn)?shù)為94.3%、六方晶型良好,粒徑達17.52μm的六方氮化硼顆粒;經過2 000℃高溫精制后的六方氮化硼顆粒具有較高的結晶度和致密度,質量分?jǐn)?shù)可達到98.5%,粒徑可達到30μm以上。
[Abstract]:Triethanolamine borate was synthesized by using triethanolamine and boric acid as raw materials and toluene as water-carrying agent. Hexagonal boron nitride particles were prepared by sintering triethanolamine borate in ammonia atmosphere. The intermediate and final products were characterized by FTIR XRDX NMR. The results showed that triethanolamine borate was used as precursor. After sintered at 1 200 鈩，

本文編號：1603015