本文選題：凍干機　切入點：加熱板　出處：《華東理工大學》2017年碩士論文　論文類型：學位論文

【摘要】：真空凍干機是一種利用冷凍真空干燥技術的化工過程裝備,其應用十分廣泛。但相比于國外技術而言,國產設備在生產效率、能耗等級、設備可靠性上仍有較大的差距。因此,為提高設備的可靠性,本文結合凍干機發展趨勢,采用先進的現代設計方法設計了一臺真空凍干機,并對核心部件進行了分析研究。本研究首先確定了 Ray125型真空凍干機的整體設計方案,并對整個系統參數進行了理論分析和計算。在此基礎上,對干燥罐、冷凝器進行了常規設計,并使用有限元分析軟件行了設計研究和設計驗證;同時基于彈性分析設計方法,對加熱板和冷凝器進行了的分析設計研究。為進一步提高設計的可靠性和安全性,對干燥罐進行了失穩分析,對冷凝器進行了疲勞分析。本文設計的真空凍干機已成功應用于實際生產,并已交付客戶用于咖啡的凍干,且實現了兩年無故障的運行。
[Abstract]:Vacuum freeze drying machine is equipped with a chemical process using the vacuum freeze drying technology, its application is very extensive. But compared with foreign technology, domestic equipment in the production efficiency, energy consumption level, there is still a large gap between the reliability of the equipment. Therefore, in order to improve the reliability of the equipment, combining with the development trend of the lyophilizer, the modern advanced design method to design a vacuum freeze drying machine, and the core components are analyzed. This study first determine the overall design scheme of Ray125 type vacuum freeze drying machine, and the system parameters are analyzed and calculated. Based on this, the drying tank, condenser were conducted. Design and the design research and design verification using finite element analysis software design method based on elastic analysis; at the same time, the research on the analysis and design of the heating plate and the condenser. In order to further improve the design The reliability and safety of the drying tank were analyzed. The fatigue analysis of the condenser was carried out. The vacuum freeze-drying machine designed in this paper has been successfully applied to the actual production, and has been delivered to the customers for coffee freeze-drying, and it has been running for two years without fault.

【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TQ051.5

【參考文獻】

相關期刊論文 前10條

1 李進霞;張偉杰;張素香;;有限元法及應用狀況[J];科技創新導報;2012年31期

2 王劍;兆文忠;;基于結構應力法的焊接結構優化設計[J];大連海事大學學報;2011年02期

3 王艷;;基于可靠性理論的壓力容器設計方法及其應用研究[J];科技信息;2010年35期

4 葉康生;陸天天;袁駟;;結構幾何非線性分析中臨界點的直接求解[J];工程力學;2010年10期

5 楊立棟;董俊華;高炳軍;;內壓圓筒斜接管在面內循環彎曲載荷作用下的棘輪效應研究[J];壓力容器;2010年06期

6 祁玉紅;;全焊接板式換熱器應力分析及評定[J];化工機械;2010年02期

7 楊德生;繆正華;趙國臣;;應力線性化原理在壓力容器分析設計中的應用[J];化工裝備技術;2010年01期

8 鄭津洋;繆存堅;壽比南;;輕型化——壓力容器的發展方向[J];壓力容器;2009年09期

9 卓高柱;孔凡敬;郭華波;韓兆強;;壓力容器有限元分析及等效線性化處理[J];發電設備;2008年05期

10 王曙光;徐言生;;短管圓環式水汽凝結器設計與應用研究[J];食品工業;2008年02期

，

本文編號：1595622