發布時間：2019-03-14 08:40

【摘要】：針對飛機結構件轉角數控(NC)加工編程效率低、工作量大、質量不穩定等問題,提出一種基于轉角面的自動擴展技術,并結合工藝知識建立加工模型,為實現轉角數控加工自動編程技術奠定了基礎。首先定義了轉角、轉角面、轉角加工模型及轉角加工干涉域等概念;然后給出了自動擴展、側轉面與切元計算、干涉域構建等技術,實現轉角加工模型的構建;最后,基于以上研究開發了轉角數控加工自動編程系統,并初步應用于某型號飛機結構件的生產,應用結果表明,該技術顯著提高了轉角數控加工編程的效率和質量,降低了編程工作量。
[Abstract]:In order to solve the problems such as low programming efficiency, large workload and unstable quality of NC (NC) machining for aircraft structural parts, an automatic extension technology based on corner surface is proposed, and the machining model is established based on process knowledge. It lays a foundation for the realization of automatic programming technology of corner NC machining. Firstly, the concepts of rotation angle, corner surface, corner machining model and corner machining interference domain are defined, and then the automatic extension, calculation of side rotation surface and tangent element, and construction of interference domain are given to realize the construction of corner machining model. Finally, the automatic programming system of corner NC machining is developed based on the above research and applied to the production of certain aircraft structural components. The application results show that this technology can significantly improve the efficiency and quality of NC machining programming. Reduced programming effort.
【作者單位】： 北京航空航天大學機械工程及自動化學院;
【基金】：國家重大科技專項(2012ZX04010051) 遼寧省航空聯合基金(2014028026)~~
【分類號】：V260.6

【相似文獻】

相關期刊論文 前1條

1 曲鵬文;;hyperMILL~汶自動編程五軸刀路產生方式[J];航空制造技術;2010年03期

，

本文編號：2439826