通用無量綱侵蝕燃燒模型
本文選題:無噴管助推器 + 侵蝕燃燒; 參考:《固體火箭技術》2016年02期
【摘要】:Mukunda和Paul提出了與發動機尺寸、形狀以及推進劑無關的通用侵蝕燃燒機理,但該模型沒有考慮負侵蝕燃燒的影響。利用侵蝕燃燒過程的無量綱參數,將該模型進行擴展,以考慮負侵蝕燃燒影響,發展出通用無量綱侵蝕燃燒模型。將該模型與一維非定常內彈道計算方法相結合,進行無噴管助推器內彈道性能分析。通過對不同燃溫下串裝雙燃速無噴管助推器內彈道性能的分析,得到了與實驗數據相吻合的壓強以及推力分布。驗證了該無量綱侵蝕燃燒模型的通用性,由于模型與發動機尺寸、形狀以及推進劑無關,使得該方法成為設計分析無噴管助推器的可靠實用工具。
[Abstract]:Mukunda and Paul proposed a general erosion combustion mechanism independent of engine size, shape and propellants, but the model did not take into account the influence of negative erosion combustion. By using the dimensionless parameters of the erosion combustion process, the model is extended to consider the influence of negative erosion combustion, and a general dimensionless erosion combustion model is developed. The model is combined with one dimensional unsteady interior trajectory calculation method to analyze the interior ballistic performance of nozzles-free booster. Based on the analysis of the interior ballistic performance of the tandem dual combustion rate nozzle-free booster at different burning temperatures, the pressure and thrust distribution consistent with the experimental data are obtained. The generality of the dimensionless erosion combustion model is verified. Because the model is independent of engine size, shape and propellant, this method is a reliable practical tool for the design and analysis of nozzle-free booster.
【作者單位】: 中國航天科技集團公司四院四十一所固體火箭發動機燃燒熱結構與內流場國防科技重點實驗室;
【基金】:國防基礎科研項目(B0320132006)
【分類號】:V435
【參考文獻】
相關期刊論文 前2條
1 陳林泉;毛根旺;霍東興;何國強;;無噴管助推器非定常動邊界內流場數值模擬[J];固體火箭技術;2008年05期
2 霍東興;陳林泉;嚴利民;;雙燃速串裝藥柱無噴管助推器性能分析[J];航空兵器;2008年04期
【共引文獻】
相關期刊論文 前4條
1 黃禮鏗;劉徐飛;霍東興;馬利峰;;通用無量綱侵蝕燃燒模型[J];固體火箭技術;2016年02期
2 胡聲超;鮑福廷;趙瑜;;基于變量化設計技術的整體式固沖發動機一體化設計系統[J];科學技術與工程;2012年14期
3 丁林;鮑福廷;胡海峰;蔡強;陳超;;無噴管助推器組合藥柱研究[J];固體火箭技術;2011年03期
4 陳林泉;毛根旺;霍東興;何國強;;無噴管助推器喉部侵蝕燃燒規律研究[J];固體火箭技術;2009年02期
【二級參考文獻】
相關期刊論文 前4條
1 曹任剛;;無噴管固體火箭發動機內彈道計算[J];航空兵器;2006年01期
2 胡建新,朱伯鵬,夏智勛,方丁酉,郭健;固體火箭沖壓發動機無噴管助推器性能分析[J];導彈與航天運載技術;2004年04期
3 汪志清;無噴管固體發動機裝藥技術研究[J];推進技術;1994年03期
4 張偉青;無噴管發動機內彈道性能簡化計算方法[J];上海航天;1991年05期
【相似文獻】
相關期刊論文 前10條
1 商國云;;高速旋轉固體火箭推進劑侵蝕燃燒問題的研究[J];沈陽工業學院學報;1984年02期
2 郜冶 ,張唯;限定侵蝕燃燒壓力峰的設計準則[J];推進技術;1985年02期
3 少霖;固體推進劑的侵蝕燃燒試驗研究[J];推進技術;1988年05期
4 利鳳祥;陳景蕙;;能反映氧化劑粒度作用機理的侵蝕燃燒理論模型[J];固體火箭技術;1988年03期
5 張超才,孫緒全,呂振忠;無噴管固體火箭發動機侵蝕燃燒初步實驗研究[J];航空動力學報;1989年02期
6 孫誠敏;;固體推進劑發動機的侵蝕燃燒研究[J];固體火箭技術;1992年02期
7 楊tD;趙東民;余貞勇;;某低燃速推進劑侵蝕燃燒模型研究[J];宇航學報;2008年06期
8 Robert;L.Glick;葉定友;;溫度敏感性和侵蝕燃燒[J];國外固體火箭技術;1983年02期
9 張宜 ,夏祥興 ,李宜敏;復合推進劑侵蝕燃燒特性的κ-ε參數表征[J];推進技術;1988年05期
10 陳林泉;毛根旺;霍東興;何國強;;無噴管助推器喉部侵蝕燃燒規律研究[J];固體火箭技術;2009年02期
相關碩士學位論文 前1條
1 唐必順;固體火箭發動機侵蝕燃燒非穩態過程的數值模擬[D];南京理工大學;2014年
,本文編號:2047085
本文鏈接:http://www.sikaile.net/kejilunwen/hangkongsky/2047085.html