發布時間：2018-07-15 11:48

【摘要】：高3618塊蓮花油層為一厚層塊狀稠油純油藏,含油面積1.16km2,地質儲量1323.3×104t,標定采收率14.6%。于1987年采用蒸汽吞吐開發方式投入開發,近年來受油藏地質特點及蒸汽吞吐末期采出程度高,地層壓力水平低,繼續吞吐效果差等影響,產量遞減較快,最終采收率低。本次結合區塊已完鉆井的鉆井、錄井、測井及三維地震等資料,利用精細地層對比技術、儲層綜合評價技術、測井識別技術、地質建模技術、剩余油研究及數值模擬技術等,綜合對高3618塊蓮花油層的構造特征、沉積特征、儲層特征、油藏類型、油水關系、地質儲量、蒸汽吞吐開采效果、剩余油分布規律進行深入研究與評價。在此基礎上,根據精細油藏描述地質體認識和剩余油分布和潛力提出了下一步提高采收率的合理開發方式。
[Abstract]:The high 3618 Lianhua reservoir is a thick layer thick oil pure oil reservoir with an oil area of 1.16km2 and a geological reserve of 1323.3 x 104t. The calibrated recovery rate 14.6%. was developed by steam stimulation development in 1987. In recent years, the reservoir geological characteristics and the stage of steam stimulation at the end of the period are high, the level of the ground pressure is low, and the effect of continuous huff and puff is poor, and so on. In this combination, the drilling, logging, logging and 3D seismic data have been completed in this area, and the structural characteristics of the 3618 High lotus oil layers are integrated with fine stratigraphic contrast technology, comprehensive reservoir evaluation technology, logging recognition technology, geological modeling technology, residual oil research and numerical simulation technology. The product features, reservoir characteristics, reservoir types, oil and water relations, geological reserves, the effect of steam huff and puff exploitation and the distribution of residual oil are deeply studied and evaluated. On this basis, a reasonable development method for the next step of high recovery is proposed based on the description of the geological body and the distribution and potential of the remaining oil in the fine reservoir.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：P618.13

【參考文獻】

相關期刊論文 前1條

1 龔春輝,梁丹旭,柳孟文;雷11塊測井精細解釋及應用[J];特種油氣藏;2003年S1期

，

本文編號：2123967