本文選題：半導體激光器恒流源 + USB接口�。� 參考：《吉林大學》2015年碩士論文

【摘要】：隨著科學技術不斷向前發展，，電子電器設備涌現出越來越多的由計算機遠程控制的程控儀器和設備，計算機與外圍設備之間的良好通信問題成為當下電子電器領域的主要研究課題。由于現代技術導致的計算機和外圍設備之間的數據通信量越來越大，數據類型越來越復雜，對通信要求越來越高，傳統的通信方式已經漸漸地不能適應當下飛速發展的電子科技。此時，USB（UniversalSerialBus）以其獨有的速度快、使用靈活方便、支持熱插拔等優勢迅速占領了通信傳輸界的市場，從此，串行通信總線技術在計算機通信和自動控制領域得到了廣泛的應用。 本文首先分析了半導體激光器恒流驅動器的一系列優缺點，并根據現有國內外研究現狀提出了半導體激光器恒流驅動器所面臨的瓶頸問題，提出了解決這一問題客觀必要性和迫切性。同時學習了單片機技術和串行通信理論，了解了USB總線系統的基本特征、通信協議等基礎知識，掌握了USB通信的基本原理和過程，在實驗室原有程控儀器半導體激光器恒流驅動器的基礎上，設計完成對半導體激光器恒流驅動器的上位機控制工作。 接著，本論文著重研究了半導體激光器恒流源的工作原理和運行方式，在其原有硬件環境的基礎上，運用面向?qū)ο缶幊痰腗FC編程模塊成功編譯了具有上位機控制功能的系統軟件，達到了由計算機遠程控制半導體激光器恒流驅動器的目的。與此同時，本論文應用該上位機控制軟件，對不同的工作模式下的恒流源工作時電流進行采樣，并利用MATLAB對所得數據進行處理分析，實現對恒流源的穩定性研究。
[Abstract]:With the continuous development of science and technology, more and more program-controlled instruments and devices controlled by computers have sprung up. The problem of good communication between computers and peripherals has become the main research topic in the field of electronics and electrical appliances. As a result of modern technology, the amount of data communication between computers and peripherals is increasing, the data types are becoming more and more complex, and the communication requirements are becoming higher and higher. The traditional communication mode has been gradually unable to adapt to the rapid development of electronic technology. At this time, the USBU Universal Serial bus (USB) has occupied the market of the communication transportation field rapidly because of its unique speed, flexibility and convenience, supporting hot swapping and so on. Since then, the serial communication bus technology has been widely used in the field of computer communication and automatic control. In this paper, firstly, a series of advantages and disadvantages of semiconductor laser constant current driver are analyzed, and the bottleneck problem of semiconductor laser constant current driver is put forward according to the current research situation at home and abroad. The objective necessity and urgency of solving this problem are put forward. At the same time, we study the technology of single-chip computer and serial communication theory, understand the basic characteristics of USB bus system, communication protocol and other basic knowledge, master the basic principle and process of USB communication. On the basis of the original program controlled instrument semiconductor laser constant current driver in laboratory, the upper computer control of semiconductor laser constant current driver is designed and completed. Then, this paper focuses on the working principle and operation mode of semiconductor laser constant current source, based on its original hardware environment. The system software with the function of upper computer control is compiled successfully by using the MFC programming module of object-oriented programming, and the purpose of remote controlling the constant current driver of semiconductor laser by computer is achieved. At the same time, this paper applies the control software of the host computer to sample the current of the constant current source under different working modes, and to process and analyze the obtained data by using MATLAB to realize the stability research of the constant current source.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN248.4

【參考文獻】

相關期刊論文 前4條

1 向紅軍;雷彬;;PC與便攜式儀表的串行通訊及數據處理程序設計[J];電子測量技術;2007年01期

2 劉思程,余彬;MFC類庫實現多線程的調度和處理[J];計算機時代;2003年08期

3 汪鋒鎖;曾璐;;基于VC6.0的單片機和PC簡易通信設計[J];科技情報開發與經濟;2007年03期

4 徐洪斌,蘇鐵熊,董小瑞;多線程技術及其實現[J];山西電子技術;2003年03期

本文編號：1834171