本文選題：切線機　切入點：設計　出處：《中北大學》2017年碩士論文　論文類型：學位論文

【摘要】：隨著工業生產技術的發展和科學研究水平的提高,手機、電腦等電子產品在生活中得到了越來越廣泛的運用,并帶動其相關零部件產業迅猛發展。在此類電子產品的各個組件中,揚聲器音圈組件以其尺寸小、精度高,而且具有極高聲學要求的特點而受到廣泛關注。在全自動化音圈生產具有一定難度的現狀下,開發研制自動化音圈生產設備勢在必行。本文研究了相關切線機的類型和研究發展現狀,依據客戶要求并結合揚聲器音圈的特殊性,分析了音圈切線機的關鍵結構、所要實現的動作過程和控制方式,完成音圈切線機的機械結構整體布局設計和監控系統設計。本文對音圈切線機的傳輸機構進行了分析和設計,并對傳輸機構關鍵零部件進行計算校核,以保證傳輸機構運行的穩定性;本文設計的音圈切線機切線機構是解決音圈切線效率低,質量梯度問題的關鍵;本文對音圈線的定位方式進行了分析,并對其裝置進行了設計,以保證音圈載體的精確定位;音圈線夾取機構是音圈切線中的關鍵結構,本設計采用氣動機械手夾取音圈線,詳細分析了音圈線夾取機構的動作過程和時序分配,分析確定了夾取機構裝置的類型、夾取力的大小和傳遞關系式,并采用Matlab軟件對夾爪傳遞函數進行仿真分析,使用PID算法對系統進行改進;為實現音圈切線機的系統監控和故障顯示,以便于對設備進行調試和維護,本文設計了音圈切線機系統監控界面。為了對已經設計好的音圈切線機模型進行性能分析,本文采用ADAMS機械動力學仿真軟件和Matlab/Simulink控制軟件的聯合技術進行系統仿真,并針對仿真結果對音圈切線機控制系統進行優化。
[Abstract]:With the development of industrial production technology and the improvement of scientific research level, mobile phones, computers and other electronic products have been more and more widely used in daily life. And drive the rapid development of its related parts industry. Among the components of this kind of electronic products, the loudspeaker voice coil assembly is small in size and high in accuracy. And it has the characteristic of very high acoustics requirement and has been widely concerned. Under the condition that the production of fully automatic voice coil has some difficulty, It is imperative to develop and develop automatic voice coil production equipment. In this paper, the types and development status of related tangent machine are studied, and the key structure of voice coil tangent machine is analyzed according to customer requirements and combining with the particularity of loudspeaker voice coil. The whole layout design and monitoring system design of the voice coil tangent machine are completed. The transmission mechanism of the voice coil tangent machine is analyzed and designed in this paper. The key parts of the transmission mechanism are calculated and checked to ensure the stability of the transmission mechanism. The key to solve the problem of low efficiency and quality gradient of the voice coil tangent machine is designed in this paper. In this paper, the positioning mode of the voice coil line is analyzed, and the device is designed to ensure the accurate positioning of the voice coil carrier, which is the key structure of the voice coil tangent line. The action process and timing distribution of voice coil wire clamp mechanism are analyzed in detail. The type of clamping mechanism, the size of clamping force and the transfer relation are determined, and the Matlab software is used to simulate the claw transfer function. The PID algorithm is used to improve the system, in order to realize the system monitoring and fault display of the voice coil tangent machine, it is convenient to debug and maintain the equipment. In this paper, the monitoring interface of the voice coil tangent machine system is designed. In order to analyze the performance of the sound coil tangent machine model, this paper adopts the combined technology of ADAMS mechanical dynamics simulation software and Matlab/Simulink control software to carry out the system simulation. According to the simulation results, the control system of voice coil tangent machine is optimized.
【學位授予單位】：中北大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN643

【參考文獻】

相關期刊論文 前10條

1 孟彩茹;張高青;李夏楠;李強;;夾持機械手爪機構的設計與優化[J];機械設計與制造;2016年06期

2 鄧德偉;孫晉華;王鑫林;張洪潮;;激光功率對激光熔覆鎳基合金涂層組織與性能的影響[J];稀有金屬;2016年01期

3 郭華鋒;李菊麗;孫濤;;激光切割技術的研究進展[J];徐州工程學院學報(自然科學版);2015年04期

4 孫偉偉;劉永偉;霍衛;;PROFACE觸摸屏在汽提塔控制系統中的應用[J];聚酯工業;2015年04期

5 沈偉;崔霞;;比例伺服閥靜動態特性仿真建模[J];計算機仿真;2015年02期

6 姜洪生;張所全;韓劍宏;;切割方式對直接淬火鋼板的影響[J];金屬熱處理;2014年11期

7 程明;張淦;花為;;定子永磁型無刷電機系統及其關鍵技術綜述[J];中國電機工程學報;2014年29期

8 汪永剛;李乃健;;搭載式激光切割機在中厚板加工中的應用[J];焊接;2014年06期

9 夏江濤;孫冬嬌;;Matlab在現代通信原理課程中的應用[J];實驗技術與管理;2014年01期

10 金國強;;有刷直流電機的數學模型及參數測量方法[J];大學物理;2014年01期

，

本文編號：1615529