【摘要】：船舶備用電源的雙向充放電控制一直是船舶制造和控制領域亟需解決的問題。針對該問題本文提出一種基于峰電流模式控制的蓄電池充/放電轉換器智能控制系統,該系統可用于對船舶多模塊備用電源進行有效控制。本文將降階建模技術與電流模式控制的小信號模型相結合,設計電流傳感網絡和電壓反饋補償程序,從而實現了靈活精確的蓄電池智能控制系統。最后通過小信號仿真實驗結果,驗證所提出智能控制系統的有效性。
[Abstract]:The bi-directional charge discharge control of a ship's standby power supply has been an urgent problem in the field of shipbuilding and control. In this paper, an intelligent control system of battery charge / discharge converter based on peak current mode control is proposed. This system can be used to control the multi module standby power supply of ships effectively. This paper will model the reduced order modeling. The technology is combined with the small signal model controlled by current mode, and the current sensor network and voltage feedback compensation program are designed to realize the flexible and accurate intelligent control system of the battery. Finally, the effectiveness of the proposed intelligent control system is verified by the result of the small signal simulation experiment.
【作者單位】： 四川城市職業學院汽車與信息工程學院;
【分類號】：U674.703.3

【相似文獻】

相關期刊論文 前1條

1 柯芳;涅烏希賓;;飛行器智能控制系統中運用自組織方法建模算法研究[J];彈箭與制導學報;2010年05期

，

本文編號：2137463