本文選題：武備控制系統 + 數據分析儀　； 參考：《江蘇科技大學》2016年碩士論文

【摘要】：數據分析儀在武備控制系統中起著重要作用,可通過該分析儀獲取系統各設備在網絡上的通訊信息,從而進行設備狀態診斷;并且在武備控制系統交付階段,依照需求設計試驗,測試各分系統乃至全系統的性能指標,輔助驗收人員進行指標驗收;從而有效地提高系統聯調、系泊航行以及售后服務的效率。由于武備控制系統缺乏數據分析設備,操作人員無法在線監控各個分系統間的通訊狀態、控制時序。鑒于上述需求,本文基于.NET3.5框架,使用C#編程語言,SQLite數據庫,以加固型便攜式工控計算機為硬件主體,綜合了三層架構和客戶端/服務器模型,設計開發出能夠運行在Window系統上的武備控制系統數據分析儀設備。在數據訪問層進行訪問數據庫、數據解析、統計等,為上層提供數據服務;在業務邏輯層,提取DAL層數據組建數據表格,進行數據傳遞;在顯示層,本文完成主界面、導入數據和數據回放界面設計,實現導入TXT數據至數據庫、數據解析、顯示數據統計圖表、曲線分析、數據錄取回放、故障診斷與定位、性能指標檢測功能。通過上述三層構架的設計,為系統在系統聯調、交驗、靶場試驗、售后服務過程中提供技術保障,縮短各個階段的時間。有效的數據分析和準確的故障診斷是保證武備控制系統正常運作的前提。本文通過數據分析儀的設計研究,實現了武備控制系統的數據分析功能。通過該分析儀,可有效的分析系統數據報文,快速診斷出故障位置、原因,并給出相應的解決方案。從而提高了系統的工作效率。調試結果顯示成功完成預期目標。
[Abstract]:The data analyzer plays an important role in the control system of Wubei, through which the communication information of each equipment on the network can be obtained, and the status of the equipment can be diagnosed, and the state of the equipment can be diagnosed in the phase of delivery of the control system of Wubei. According to the demand design test, the performance indexes of each subsystem and even the whole system are tested, and the acceptance personnel are assisted to carry out the index acceptance so as to effectively improve the efficiency of system connection adjustment, mooring navigation and after-sales service. Due to the lack of data analysis equipment in Wubei control system, operators can not monitor the communication status of each subsystem online and control the timing. In view of the above requirements, based on the framework of .NET3.5, this paper uses C # programming language SQLite database, takes the reinforced portable industrial control computer as the main hardware, integrates the three-tier architecture and the client / server model. The data analyzer equipment of Wubei control system which can run on Window system is designed and developed. In the data access layer to access the database, data analysis, statistics and so on, to provide data services for the upper layer; in the business logic layer, extract DAL layer data to build data tables, for data transfer; in the display layer, this paper completes the main interface, The interface design of import data and data playback realizes the function of importing TXT data to database, analyzing data, displaying data statistic chart, curve analysis, data recording and playback, fault diagnosis and location, and performance index detection. Through the design of the three layers above, the system can provide technical support and shorten the time of each stage in the process of system connection, inspection, range test and after-sales service. Effective data analysis and accurate fault diagnosis are the prerequisite to ensure the normal operation of the weapon control system. In this paper, the data analysis function of Wubei control system is realized through the design and research of data analyzer. Through this analyzer, the system data message can be effectively analyzed, the fault location and reason can be quickly diagnosed, and the corresponding solution is given. Thus, the working efficiency of the system is improved. Debugging results show that the desired goal has been successfully achieved.
【學位授予單位】：江蘇科技大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：U665.26

【相似文獻】

相關期刊論文 前8條

1 張慶河;;海醫所研制成功微循環數據分析儀[J];海軍醫學;1994年01期

2 伊大成;;OBD-2型汽車數據分析儀——檢測你的愛車的必備設備[J];電子制作;2006年04期

3 ;力科公司推出具備X-Stream技術的串行數據分析儀實時分析復雜而高速的數據[J];國外電子測量技術;2002年05期

4 ;力科公司推出具備X-Stream技術的串行數據分析儀[J];電子測量與儀器學報;2002年04期

5 ;力科公司:具備X-Stream技術的串行數據分析儀[J];郵電商情;2002年19期

6 程康志;;數據分析儀在陌生發動機故障檢修中的使用(下)[J];摩托車;2012年20期

7 程康志;;摩托車數據分析儀中的波形識別之一(上)[J];摩托車;2012年14期

8 ;[J];;年期

相關會議論文 前1條

1 王平;施文灶;黃f^;程明傳;;便攜式網絡數據分析儀的研究與設計[A];2008’“先進集成技術”院士論壇暨第二屆儀表、自動化與先進集成技術大會論文集[C];2008年

相關碩士學位論文 前2條

1 霍逸群;應用于公務船武備控制系統的數據分析儀研究[D];江蘇科技大學;2016年

2 曾成;智能電網電流數據分析儀的設計[D];貴州大學;2015年

，

本文編號：1784444