本文關鍵詞：銀納米材料的形貌可控制備及其應用研究，由筆耕文化傳播整理發布。

 在分類學科中查詢

所有學科

材料科學

物理學

互聯網技術

計算機軟件及計算機應用

無線電電子學

化學

機械工業

電信技術

無機化工

可控制

目前沒有對本詞條修改信息

    Controllable Synthesis of Nano-Sized TiO_2 with PEG and Its Photocatalytic Activity

    PEG輔助納米TiO_2的可控制備及其光催化活性

短句來源

    SiC/Al composites with unique meso-scale structures and their controllable fabrication technology based on pressureless infiltration process

    具有獨特細觀結構的SiC/Al復合材料及其無壓浸滲可控制備

    Controllable Preparation of Uniformly Dispersed Nano-Scale Metal Oxides

    均分散納米氧化物的可控制備

短句來源

    In this thesis, the controllable preparation and structural characteristics of supramolecular UV absorbents based on Layered Double Hydroxides(LDHs) are reported.

    本論文對新型超分子插層結構紫外阻隔材料進行了可控制備及結構與性能的研究。

短句來源

    In these studies, a novel, effective strategy named "seed catalysis" has been discovered here to synthesize silver nanostructures with controllable morphology by using Na2S as control agent.

    在研究中還發現了一種新的、高效的“晶種催化作用”策略,即采用Na_2S作為控制劑來形貌可控制備銀納米材料。

短句來源

更多       

    Controllable Synthesis of Nano-Sized TiO_2 with PEG and Its Photocatalytic Activity

    PEG輔助納米TiO_2的可控制備及其光催化活性

短句來源

    SiC/Al composites with unique meso-scale structures and their controllable fabrication technology based on pressureless infiltration process

    具有獨特細觀結構的SiC/Al復合材料及其無壓浸滲可控制備

    Controllable Preparation of Uniformly Dispersed Nano-Scale Metal Oxides

    均分散納米氧化物的可控制備

短句來源

    In this thesis, the controllable preparation and structural characteristics of supramolecular UV absorbents based on Layered Double Hydroxides(LDHs) are reported.

    本論文對新型超分子插層結構紫外阻隔材料進行了可控制備及結構與性能的研究。

短句來源

    In these studies, a novel, effective strategy named "seed catalysis" has been discovered here to synthesize silver nanostructures with controllable morphology by using Na2S as control agent.

    在研究中還發現了一種新的、高效的“晶種催化作用”策略,即采用Na_2S作為控制劑來形貌可控制備銀納米材料。

短句來源

更多       

    Controlled Synthesis and Property Study of Low-dimensional Nanostructured Materials

    低維納米結構材料的可控制備與性能研究

短句來源

    The results show that the size of SiO2 nanoparticles can be controlled in 50~200 nm.

    結果表明,納米SiO2顆�？煽刂圃�50~200 nm.

短句來源

    the deposition rate and compositions of the coatings could be controlled by controlling c(Co2+)/c(Ni2+)in bath;

    通過控制鍍液中c(Co2+)/c(Ni2+)的比值,可控制沉積速率及鍍層中鎳、鈷元素的相對含量;

短句來源

    Study on the Morphology-Controlled Synthesis of Silver Nanomaterials and Their Applications

    銀納米材料的形貌可控制備及其應用研究

短句來源

    nanometer silica particles with the size 15~30nm and the specific surface area of powder is up to 400~650m2/g were prepared with the microemulsion system of silicate solution, cyclohexane, OP-10, and n-pentanol;

    采用可溶性硅酸鹽溶液／OP乳化劑／正戊醇／環己烷的微乳液體系能夠制備出比表面積在400～650m~2／g左右，粒徑可控制在15～30nm左右的納米SiO_2粒子；

短句來源

更多       

查詢“可控制”譯詞為用戶自定義的雙語例句
    我想查看譯文中含有：的雙語例句

  controllable

Single machine scheduling with controllable processing times and compression costs (part i: equal times and costs)

In this paper, authors consider a machine scheduling problem with controllable processing times.

Single machine scheduling with controllable processing times and compression costs:proof of theorems

Single machine scheduling with controllable processing times and compression costs

A single machine scheduling problem with controllable processing times and compression costs is considered.

更多          

  controllable

Single machine scheduling with controllable processing times and compression costs (part i: equal times and costs)

In this paper, authors consider a machine scheduling problem with controllable processing times.

Single machine scheduling with controllable processing times and compression costs:proof of theorems

Single machine scheduling with controllable processing times and compression costs

A single machine scheduling problem with controllable processing times and compression costs is considered.

更多          

The fusing-off temperatures ofthermal-links made from heat-sensitive alloys presentprobability distribution。The fusing-off temperaturescan be controlled by the fusing off tolerance throughreasonable composition and nucrostructure design,throw away the oxidic film and increasing surfacetension。According to the fusing-off tolerance,onlythe alloys with euteLtic composition and a part ofnoneutectic composition near eutectic composition canbe used to prepare the thermal-links。

熔斷溫度是熱熔斷體的主要性能指標。用感溫合金制作的熱熔斷體的熔斷溫度呈幾率分布。正確的成分設計和組織設計并考慮在面氧化膜的去除和提高液態合金表面張力，可控制熔斷溫度偏差在要求范圍之內。根據熔斷溫度偏差，只有共晶成分合金和近共晶成分的部分共晶合金才適合于制作熱熔斷體。

1-3 piezo-composite materlals are widely investigated and applied at present.Presented in this paper are the theoretical models, methods of fabrication and results of laboratory studies of the composites. There are not only planar and thickness-mode resonances but also lateral-mode resonances in a circular 1-3 piezo-composite plate. Also pIesented here are the characteristics of the composites, such as low acoustic impeddnces, low dieiectric constants, high hydrostatic piezoelectric constants and the controllability...

1-3 piezo-composite materlals are widely investigated and applied at present.Presented in this paper are the theoretical models, methods of fabrication and results of laboratory studies of the composites. There are not only planar and thickness-mode resonances but also lateral-mode resonances in a circular 1-3 piezo-composite plate. Also pIesented here are the characteristics of the composites, such as low acoustic impeddnces, low dieiectric constants, high hydrostatic piezoelectric constants and the controllability of the PZT pillar distribution tvhich facilitate the improvement of the time and space-responses of the piezocomposite transducers.

1－3型壓電復合材料是目前研究和應用得比較廣泛的一種壓電材料．本文簡述了這種壓電復合材料的理論模型、制作方法和實驗結果；指出除了圓形PZT壓電材料所具有的徑向模和厚度模以外，1－3型壓電復合材料還具有橫向結構模．本文介紹了這種壓電復合材料的特點，如低聲阻抗、低介電常數、高靜水壓壓電常數以及PZT相分布的可控制性等．這些特點有利于改善壓電復合材料換能器的時間響應和空間響應．

The core- shell magnetic polymer microspheres containing - CHO groups have been prepared by dispersion copolymerization of styrene, acrolein in the presence of magnetic oxide modified by polyethylene glycol by ultrasonic dispersion. The diameter of microspheres can be controlled between 50 ￣ 200μm, and the content of Fe3O4 in microspheres is 0. 4￣1. 5 %, the content of- CHO groups of microspheres varies between 0. 04 ￣ 0. 1 mmol·g-1 determined by electrical conductance titration. The effects of initiator system,...

The core- shell magnetic polymer microspheres containing - CHO groups have been prepared by dispersion copolymerization of styrene, acrolein in the presence of magnetic oxide modified by polyethylene glycol by ultrasonic dispersion. The diameter of microspheres can be controlled between 50 ￣ 200μm, and the content of Fe3O4 in microspheres is 0. 4￣1. 5 %, the content of- CHO groups of microspheres varies between 0. 04 ￣ 0. 1 mmol·g-1 determined by electrical conductance titration. The effects of initiator system, stabilizer system, dispersion medium on the diameter and the -CHO content of microshperes were investigated.

用超聲波分散處理Ｆｅ３Ｏ４粉末同穩定劑溶液的分散體系，使Ｆｅ３Ｏ４粉末能穩定地分散成細微粒子，同時增強了Ｆｅ３Ｏ４細微粒子同單體、引發劑的親合性。苯乙烯—丙烯醛共聚物為高分子殼層，包裹Ｆｅ３Ｏ４得到了帶醛基的磁性高分子復合微球。微球粒徑可控制在５０～２００μｍ，微球中Ｆｅ３Ｏ４含量在０．４～１．５％之間，通過電導滴定法測定微球表面醛基含量在０．０４～０．１ｍｍｏＬ·ｇ－１范圍內。著重考察了引發劑體系、穩定劑體系、分散介質等對微球粒徑、表面醛基含量的影響。

<< 更多相關文摘    

 相關查詢

CNKI小工具

在英文學術搜索中查有關可控制的內容

在知識搜索中查有關可控制的內容

在數字搜索中查有關可控制的內容

在概念知識元中查有關可控制的內容

在學術趨勢中查有關可控制的內容

  本文關鍵詞：銀納米材料的形貌可控制備及其應用研究，由筆耕文化傳播整理發布。