固化工藝對玻璃纖維織物增強材料摩擦性能的影響
發布時間:2019-05-13 14:22
【摘要】:針對石棉摩擦材料的分解產物致癌且嚴重污染環境的問題,以力學性能優異的玻璃纖維織物為基體,以酚醛-縮醛黏合劑為固化劑,制成新型無石棉復合摩擦材料。研究了固化溫度和固化時間、玻璃纖維織物的纖維方向以及酚醛-縮醛黏合劑對該材料摩擦性能的影響。結果表明:當固化溫度為180℃,固化時間為1 h時,該復合材料表現出優異的摩擦磨損性能,摩擦因數為0.25,且磨損最小;復合摩擦材料中垂直于纖維方向的磨損量比平行于纖維方向的少;該玻璃纖維復合材料摩擦磨損性能符合使用要求,又因其成本較低、耐熱性好、機械強度良好等優點,可被廣泛應用于各個領域。
[Abstract]:In order to solve the problem that the decomposition products of asbestos friction materials are carcinogenic and seriously pollute the environment, a new type of non-asbestos composite friction material is prepared by using glass fiber fabric with excellent mechanical properties as matrix and phenolic acetal adhesive as curing agent. The effects of curing temperature and curing time, fiber direction of glass fiber fabric and phenolic acetal adhesive on the friction properties of the material were studied. The results show that when the curing temperature is 180 鈩,
本文編號:2475954
[Abstract]:In order to solve the problem that the decomposition products of asbestos friction materials are carcinogenic and seriously pollute the environment, a new type of non-asbestos composite friction material is prepared by using glass fiber fabric with excellent mechanical properties as matrix and phenolic acetal adhesive as curing agent. The effects of curing temperature and curing time, fiber direction of glass fiber fabric and phenolic acetal adhesive on the friction properties of the material were studied. The results show that when the curing temperature is 180 鈩,
本文編號:2475954
本文鏈接:http://www.sikaile.net/kejilunwen/cailiaohuaxuelunwen/2475954.html
最近更新
教材專著