發布時間：2018-12-14 23:55

【摘要】：采用攪拌摩擦加工技術制備了Al-Ni復合材料,并對復合材料進行不同溫度的后熱處理。結果表明,Al-Ni復合材料主要相為Al3Ni,且有部分Ni粉未完全反應;通過后熱處理可促進金屬間化合物形成,經過450℃×6h后熱處理,生成相為Al3Ni和Al3Ni2;對合金化材料進行熱處理時,晶格缺陷的增生、擴散以及缺陷的相互作用導致反應的進一步進行。
[Abstract]:The Al-Ni composites were prepared by friction stir processing, and post-heat treatment of the composites at different temperatures was carried out. The results showed that the main phase of Al-Ni composites was Al3Ni, and some of Ni powder did not react completely, and the formation of intermetallic compounds could be promoted by post heat treatment, and the phases were Al3Ni and Al3Ni2; after heat treatment at 450 鈩，

本文編號：2379542