【摘要】：用硝酸銀、己二酸二酰肼和葡萄糖為主要原料,通過化學還原法制備出粒徑為30~50 nm的納米銀顆粒;將其分散于特殊配制比例的溶劑中,制備得到納米銀導電墨水。將納米銀導電墨水高精度圖案化噴墨打印,分析了納米銀的形貌及其導電性能;研究了燒結溫度和燒結時間對打印電極電阻率的影響,結果表明,200℃燒結40 min,電阻率為0.34 m?·cm的較低值。
[Abstract]:Silver nanoparticles with a diameter of 30 ~ 50 nm were prepared by chemical reduction method using silver nitrate, dihydrazide adipate and glucose as main raw materials. The high precision patterned ink jet printing of nano-silver conductive ink was carried out, and the morphology and conductivity of nano-silver were analyzed, and the effects of sintering temperature and sintering time on the resistivity of the printing electrode were studied. The results show that the resistivity of 40 min, sintered at 200 鈩，

本文編號：2231032