本文選題：輕量化 + 鋁蜂窩�。� 參考：《玻璃鋼/復合材料》2017年03期

【摘要】：采用準靜態軸向壓縮實驗和有限元仿真相結合的方法,對EPP泡沫(聚丙烯塑料發泡材料)填充對鋁蜂窩結構壓縮性能的影響開展了研究。實驗發現,相對空鋁蜂窩,EPP泡沫填充鋁蜂窩結構的峰值力、平均抗壓強度和吸收能量分別提高了1.9%~43.33%、46.59%~179.53%和46.26%~179.04%。并且相對空鋁蜂窩與單獨EPP泡沫之和,泡沫填充結構的平均抗壓強度和總吸能分別提高了2%~23.5%和3.9%~23.3%。此外,采用Ls-dyna軟件對EPP泡沫填充鋁蜂窩的破壞過程進行了仿真,發現EPP泡沫填充可以有效抵抗蜂窩壁變形,并且獲得了與實驗較吻合的破壞過程和位移曲線。研究表明,利用EPP泡沫填充鋁蜂窩,能有效改善鋁蜂窩結構的軸向壓縮性能。
[Abstract]:The effect of EPP foam (polypropylene foaming material) on the compressive properties of aluminum honeycomb structure was studied by using quasi-static axial compression test and finite element simulation.The experimental results show that the average compressive strength, average compressive strength and absorption energy of aluminum honeycomb filled with EPP foam are increased by 1.9%, 43.33% and 46.599.53% and 46.26% respectively.Compared with the sum of empty aluminum honeycomb and single EPP foam, the average compressive strength and total energy absorption of the foam filled structure increased by 223.5% and 3.9% respectively.In addition, the failure process of aluminum honeycomb filled with EPP foam is simulated by using Ls-dyna software. It is found that EPP foam filling can effectively resist the deformation of honeycomb wall, and the failure process and displacement curve are in good agreement with the experimental results.The results show that aluminum honeycomb filled with EPP foam can effectively improve the axial compression performance of aluminum honeycomb structure.
【作者單位】： 中山大學工學院;湖南大學機械學院;
【基金】：國家自然科學基金(51675540) 博士后科學基金(2015M582323) 湖南省自然科學基金(2016JJ3039)
【分類號】：TB332

【相似文獻】

相關會議論文 前1條

1 汪洋;王湘祁;葉湘濱;隋衛平;;基于EPP的便攜式數據采集處理系統[A];中國儀器儀表學會第三屆青年學術會議論文集（下）[C];2001年

相關博士學位論文 前1條

1 郭艷婷;使用高壓釜制備聚丙烯發泡珠粒（EPP）的理論及技術[D];華南理工大學;2013年

，

本文編號：1731279