本文選題：熱重分析　切入點：有機相變復合材料　出處：《化工新型材料》2017年05期

【摘要】：用石蠟、硬脂酸、聚乙二醇(PEG_(4000))為相變主材料,活性炭和膨脹石墨為支撐材料,制備出不同配合比的復合中低溫有機相變材料,并利用熱重分析(TG)測試其受熱時的熱分解過程。活性炭和膨脹石墨的加入,可以提高硬脂酸基和石蠟基復合相變材料的起始熱分解溫度。實驗結果證明,與其他實驗樣品相比,PEG_(4000)與活性炭的質量配合比為84%∶16%制得的PEG_(4000)/活性炭復合相變材料熱穩定性較好,起始熱分解溫度為378℃,424℃時失重率為84%。
[Abstract]:Using paraffin, stearic acid, PEG4 000) as the main phase change material, activated carbon and expanded graphite as the supporting materials, the composite organic phase change materials with different mix ratio were prepared, and the thermal decomposition process of the phase change materials during heating was measured by thermogravimetric analysis (TG).The initial thermal decomposition temperature of stearic acid and paraffin based composite phase change materials can be increased by adding active carbon and expanded graphite.The results show that compared with other experimental samples, the mass mixture ratio of PEGMA4000) and activated carbon is 84: 16%, the thermal stability of the composite phase change material made of PEG_(4000)/ activated carbon is better, and the weight loss rate is 84% when the initial thermal decomposition temperature is 378 鈩，

本文編號：1724309