本文關鍵詞： 介孔二氧化鈦 模板法 兩步焙燒法　出處：《中國陶瓷》2017年01期 　論文類型：期刊論文

【摘要】：以鈦酸正四丁酯作為鈦源,乙酰丙酮作為螯合劑來抑制鈦酸正四丁酯的水解,十六烷基三甲基溴化銨陽離子表面活性劑作為為模板,采用超聲模板法制備出球形銳鈦礦介孔TiO_2,采用兩步焙燒法除去模板劑。FT-IR測試表明在478cm-1出現介孔TiO_2特征峰,XRD測試表明合成的樣品為銳鈦礦介孔TiO_2,TG-DTA測試表明合成的樣品熱穩定性較好,SEM測試表明樣品為球形顆粒且形狀均勻,TEM測試表明粒子的分散性很好,維持了很好的介孔結構。結果表明:合成的介孔TiO_2晶型有較好的完整性。
[Abstract]:With titanate as titanium source was four butyl, hydrolysis of acetylacetone as chelating agent to inhibit four butyl titanate, sixteen alkyl three methyl bromide cationic surfactant as template, the template was prepared by ultrasonic spherical mesoporous anatase TiO_2, using two stage roasting method to remove the template.FT-IR test showed that 478cm-1 appeared in the mesoporous TiO_2 peak, XRD test showed that the samples were anatase mesoporous TiO_2, TG-DTA test showed that the thermal stability of synthetic samples better, SEM test showed that the sample is spherical particles and uniform shape, TEM tests show that the particle dispersion is good, maintain a good mesoporous structure. The results show that the mesoporous TiO_2 crystal synthesis has better integrity.

【作者單位】： 東北林業大學理學院;哈爾濱理工大學材料科學與工程學院;
【基金】：中央高�；究蒲袠I(yè)務費專項資金項目(2572015BX04) 東北林業大學化學工程與工藝重點實驗室建設項目 哈爾濱市科技創新人才項目(2015RAQXJ002)
【分類號】：TQ134.11;TB383.4
，

本文編號：1538034