本文關鍵詞：增強樹脂基無石棉閘瓦的摩擦性能分析　出處：《工程塑料應用》2017年02期 　論文類型：期刊論文

  更多相關文章： 復合材料閘瓦 摩擦學設計 名義接觸壓力 滑動速度 三參數模型

【摘要】：以礦用增強樹脂基無石棉閘瓦工況條件及運行參數為背景,以酚醛樹脂基復合材料閘瓦WSM 3為研究對象,選擇名義接觸壓力P、滑動速度υ、接觸面溫度T為可調參數,考察三者與摩擦系數μ的關系。并通過3個可調參數的多種組合分析復合材料的摩擦學性能,實驗結果表明單參數、雙參數、三參數實驗方法在分析摩擦系數變化的不同性質時各有利弊。建立組合參數與摩擦系數的關系對材料摩擦學設計具有重要意義,亦適用于其它材料的摩擦學性能實驗。
[Abstract]:Based on the operating conditions and operation parameters of mine reinforced resin-based non-asbestos brake shoe, taking phenolic resin matrix composite brake shoe WSM _ 3 as the research object, nominal contact pressure and sliding velocity were selected. The relationship between the three parameters and the friction coefficient 渭 was investigated. The tribological properties of the composites were analyzed by several combinations of three adjustable parameters. The experimental results show that the tribological properties of the composites are single parameter and double parameter. The three-parameter experimental method has its advantages and disadvantages in analyzing the different properties of friction coefficient. It is of great significance to establish the relationship between the combined parameters and the friction coefficient for the tribological design of materials. It is also suitable for tribological properties of other materials.
【作者單位】： 太原理工大學機械工程學院;煤礦綜采裝備山西省重點實驗室;
【基金】：山西省科技重大專項項目(20111101040) 山西省青年科技研究基金(201601 D 021084)
【分類號】：TB332
【正文快照】： 摩擦學知識轉移到工業中去的最有效的途徑就是在設計開始階段就進行摩擦學設計[1 3],材料摩擦學設計[4 5]是這一階段的重要內容,實驗選定的材料能否滿足設備的性能需要是關鍵環節[6 8]。對于閘瓦摩阻設計,需要放在具體的工況條件及設備運行參數之下[9 11],其工作速度范圍，

本文編號：1421213