本文關鍵詞：液相還原法制備納米鎳粉　出處：《化工學報》2016年S2期 　論文類型：期刊論文

  更多相關文章： 液相還原法 納米鎳粉 NaBH NH 納米粒子 納米技術 合成

【摘要】：采用液相還原法在攪拌反應器內進行了納米鎳粉的制備研究。系統考察了反應物濃度、反應物配比(N2H4∶NiSO4)、引發劑濃度、氫氧化鈉濃度、反應溫度、攪拌速度等操作條件對鎳粉物性的影響規律,獲得了較優操作條件:NiSO4為0.8mol·L~(-1),反應物配比為6∶1,NaBH4濃度為0.01mol·L~(-1),NaOH濃度為1mol·L~(-1),反應溫度80℃,攪拌速度為2400r·min~(-1),在較優條件下制備出常溫下穩定性良好、平均粒徑107nm的面心立方結構的納米鎳粉。
[Abstract]:The preparation of nanocrystalline nickel powder in a stirred reactor was studied by liquid phase reduction method. The concentration of reactants, the ratio of reactants N _ 2H _ 4: NiSO _ 4, the concentration of initiator and the concentration of sodium hydroxide were systematically investigated. The effect of reaction temperature and stirring speed on the physical properties of nickel powder was studied. The optimum operation conditions were obtained: the ratio of reaction material was 6: 1 and the reaction temperature was 0.8mol 路L ~ (-1). The concentration of NaBH4 was 0.01 mol 路L ~ (-1). The concentration of NaOH was 1 mol 路L ~ (-1). The reaction temperature was 80 鈩，

本文編號：1414257