【摘要】：從煤礦安全監控系統升級改造方案中對數據分析和偽數據識別的需求入手,以瓦斯數據為例,分析了3種最常見的偽數據類型及其產生原因。針對傳感器標校產生的偽數據,提出應增加專門針對偽數據識別的標校實驗;針對電磁干擾產生的偽數據,提出通過預先在傳感器程序中埋入誤碼來模擬干擾點瓦斯?jié)舛戎档姆椒?針對傳輸或者設備故障產生的偽數據,提出隨機制造傳感器或者傳輸線路故障,觀察數據處理結果的方法。對某廠家的安全監控系統進行模擬檢驗,驗證了所提方法的有效性和可行性。
[Abstract]:Based on the requirement of data analysis and pseudo-data recognition in the upgrading scheme of coal mine safety monitoring system, three kinds of most common pseudo-data types and their causes are analyzed, taking gas data as an example. Aiming at the pseudo-data generated by sensor calibration, the calibration experiment for the identification of pseudo-data should be added. Aiming at the pseudo-data generated by electromagnetic interference, a method of simulating the gas concentration of interference points by embedding error codes in the sensor program is put forward. According to the pseudo data generated by transmission or equipment fault, the method of randomly manufacturing sensor or transmission line fault and observing the result of data processing is put forward. The effectiveness and feasibility of the proposed method are verified by simulating the safety monitoring system of a factory.
【作者單位】： 中煤科工集團常州研究院有限公司;
【分類號】：TD76

【相似文獻】

相關期刊論文 前1條

1 王勇;殷大發;邸彭浩;肖成;;煤礦瓦斯監測系統異常數據識別技術研究與應用[J];工礦自動化;2013年04期

，

本文編號：2373718