【摘要】：在MBD技術的實施過程中，三維工藝是其重點和關鍵，也是企業在生產和制造水平上的具體表現。MBD工藝信息模型作為三維工藝的承載體，研究它的建模過程與工藝性評價，有助于在設計的早期階段對產品的工藝進行分析，減少工藝設計人員的重復性勞動，節省研發的時間和生產成本，并使得模型能直接用于指導加工實際。MBD工藝信息模型作為產品信息的唯一載體與依據，保證了信息在傳遞過程中準確性，加快產品的生產效率的同時，全面提升了產品質量，滿足企業進行信息積累和知識庫的擴充的要求，提高企業在現代制造行業中的競爭力、適應能力、生存能力。 本文以MBD工藝信息模型為研究對象，對模型的定義、信息表達、建模方法以及工藝性評價進行了研究和探討，并在SolidWorks環境下建立了銅套的MBD工藝信息模型，利用二次開發工具Visual Basic6.0對模型的工藝信息進行提取與工藝性評價，驗證和支持了本文的觀點。 首先，論述了目前國內和國外MBD技術發展使用情況以及MBD工藝信息模型的研究現狀，指出了現今對MBD工藝信息模型研究的不足之處。 其次，對MBD工藝信息模型的定義進行了解析和補充，詳細論述了MBD工藝信息模型的基本構成并以此為依據對工藝信息層次化三維表達進行了探討，提出了一種MBD工藝信息的標注方法。 再次，根據MBD工藝信息模型的工藝性評價的含義、依據與目標，提出了MBD工藝信息模型的工藝性評價方案，并介紹了評價方案的技術基礎。 最后，，以一個銅套零件為例，建立了銅套的MBD工藝信息模型，并開發了一個小型MBD工藝信息模型的工藝性評價系統，針對這個銅套的MBD工藝信息模型，進行了工藝性評價，論證了本文的觀點。
[Abstract]:In the process of implementation of MBD technology, 3-D process is the key point and key point, and it is also the concrete performance of enterprise in production and manufacture level. As the carrier of 3-D process, the modeling process and process evaluation of MBD process information model is studied, and its modeling process and process evaluation are studied. It helps to analyze the process of the product in the early stage of the design, reduces the repetitive labor of the process designer, and saves the time of research and development and the cost of production. MBD process information model can be used as the sole carrier and basis of product information, which ensures the accuracy of information transmission, speeds up the production efficiency, and improves the product quality in an all-round way. It can meet the requirements of information accumulation and knowledge base expansion, and improve the competitiveness, adaptability and survivability of enterprises in modern manufacturing industry. Taking the MBD process information model as the research object, the definition, information expression, modeling method and process evaluation of the model are studied and discussed, and the MBD process information model of copper sleeve is established under the environment of SolidWorks. The secondary development tool Visual Basic6.0 is used to extract and evaluate the process information of the model, which validates and supports the viewpoint of this paper. Firstly, the development and application of MBD technology at home and abroad as well as the research status of MBD process information model are discussed, and the shortcomings of MBD process information model research are pointed out. Secondly, the definition of MBD process information model is analyzed and supplemented, and the basic structure of MBD process information model is discussed in detail. Based on this, the three-dimensional hierarchical expression of process information is discussed. A method of labeling MBD process information is presented. Thirdly, according to the meaning of process evaluation of MBD process information model and the aim of MBD process information model, the process evaluation scheme of MBD process information model is put forward, and the technical basis of the evaluation scheme is introduced. Finally, taking a copper sleeve part as an example, the MBD process information model of the copper sleeve is established, and a small MBD process information model evaluation system is developed. The MBD process information model of the copper sleeve is evaluated. This paper demonstrates the point of view.
【學位授予單位】：中北大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TH16

【參考文獻】

相關期刊論文 前10條

1 盧鵠;范玉青;;飛機結構產品的數字化定義[J];北京航空航天大學學報;2006年05期

2 盧鵠;范玉青;;航空產品數字化定義中工程圖作用的探討[J];工程圖學學報;2008年02期

3 張寶源;席平;;三維標注技術發展概況[J];工程圖學學報;2011年04期

4 張紹潤,常明,李春花;現代CAPP系統中工藝信息模型的研究[J];工程設計CAD與智能建筑;2002年11期

5 張祥祥;陳興玉;程五四;張紅旗;曾祥宇;;基于模型的工藝信息標識方法研究[J];圖學學報;2012年06期

6 張昕;秦坤;張超;丁明;孫文智;;基于MBD的三維工藝研究與實現[J];國防制造技術;2013年01期

7 許國玉,單忠臣,劉志強;回轉體零件特征建模及信息提取[J];哈爾濱工程大學學報;2002年06期

8 范玉青;機械產品數字化定義的數據內容及其組織[J];航空制造技術;2002年03期

9 舒啟林,王成恩;基于產品全生命周期的工藝信息模型[J];航空制造技術;2005年03期

10 畢利文;秦龍剛;楊紅宇;;面向現場的裝配工藝可視化設計[J];航空制造技術;2009年02期

本文編號：2446522